Malaysia is one of the main crude oil exporters among countries in Association of South East Asian Nations, ASEAN. Therefore, oil is widely used in many sectors, especially in transportation sectors, and it will produce a lot of oil-based waste that will harm environment. Activated carbon can help to treat this waste by using the permeable reactive barrier (PRB) concept. At the same time, Malaysia is also an agricultural based country which produces a massive amount of agricultural waste. In this study, sugarcane bagasse, corn cob and pineapple's core is chosen to produce activated carbon by using furnace heating processing and microwave processing.

Developing country causes growth of industries sectors. Despite that industrial sectors releases massive amount of waste water into the environment. At the same time, the increasing number of vehicles in Malaysia promotes the development of automobile workshop that produces huge amount of wastewater as well. Wastewater contains high level of suspended total solids and leave untreated. For instance oil, grease, dyestuff, chromium, phosphate in washing products and colouring, as well as heavy metals such as lead, cadmium, barium and others potential metals. All these hazardous wastes directly pollute the environment especially the groundwater and harm the ecosystem. In order to minimize and reduce the impact to the environment, the wastewater needed to be treated using technology such as permeable reactive barrier (PRB). Activated carbon is one of the PRB utilised. It is a compromised material for treatment of wastewater where there are varieties of sources to produce activated carbon. Malaysia as an active agricultural country, massive amount of agriculture wastes can be turned into activated carbon. They are two methods used to produce activated carbon, namely furnace heat processing and microwave processing. The usage of furnace and microwave instruments can produce different quality of activated carbon due to different mechanism involves. Furnace heat processing transferred the heat from external to the internal but microwave processing is vice versa. In this article, a brief overview of activated carbon usage for wastewater treatment is highlighted.

Pottery in Malaysia is been known for its utilized functions and unique properties. Clays as the pottery’s raw materials are a major factor that affecting the quality and reliability of some pottery products. Observations on clays’ elements and phases are very helpful for productions of the good pottery. Hence, in this review, chemical compositions of clays in terms of elements and phases structures are discussed. Basically, the most elements found in clays are Si, Al, Fe, Ti, K and Ca. Depends on location, the concentrations for those clays elements in Malaysia are at range of 24.8 – 32.4 for Si, 10.8 – 19.0 for Al, 0.09 – 2.12 for Fe, 0.08 – 1.13 for Ti and 0.45 – 3.39 for K. Several studies reported, they exist in form of oxide compound which are SiO2, Al2O3, Fe2O3, TiO2, MgO, CaO, Na2O, K2O and P2O5. The percentages of elements in clays do not only determine the clays characteristics, but also influence the physical, mechanical and chemical properties of the end product. Increase of major element like silica arises the melting point, lowers the fluidity, and enhances the hardness and tensile strength. Meanwhile, increase alumina content enables the green body to withstand the sintering temperature and also increase the hardness of the pottery.