In this letter, we report the photoinduced effect modulated by different electric fields in the Pr0.65 (Ca0.75Sr0.25)0.35MnO3/0.7PbMg1/3Nb2/3O3-0.3PbTiO3 heterostructure. The film exhibits a decrease in the resistance up to five orders of magnitude by enhancing applied electric fields, combined with an electric-field-induced insulator-to-metal transition. More interestingly, a reversible bistability arises in the photoinduced change in resistance at T < 80 K as the voltages are increased. The results can be attributed to the phase separation in manganites, which provides a prototype of photoelectric conversion for electric-field modulation of all-oxide heterostructures.

Persistent magnetoresistance effects in the phase-separated Pr0.65(Ca0.25Sr0.75)0.35MnO3/SrTiO3 and Pr0.65(Ca0.25Sr0.75)0.35MnO3/0.7PbMg1/3Nb2/3O3–0.3PbTiO3 heterostructures under a low magnetic field are investigated. It is observed that the persistent magnetoresistance effects decrease with increasing temperatures and the values for the heterostructures on 0.7Pb(Mg1/3Nb2/3)O3–0.3PbTiO3 and SrTiO3 substrates are about 86.6% and 33.2% at 40 K, respectively. More interestingly, the applied electric field on the 0.7PbMg1/3Nb2/3O3–0.3PbTiO3 substrate can suppress the persistent magnetoresistance effect, indicating that different energy landscapes can be dramatically modulated by the piezo-strain. These results are discussed in terms of the strain-induced competition in the ferromagnetic state and the charge-ordering phase by the energy scenario, which provide a promising approach for designing devices of electric-magnetic memories in all-oxide heterostructures.

No abstract

A new surface micromachining way of ultrashort plus laser for C/SiC composites with high quality and efficiency was demonstrated, including picosecond and femtosecond laser. Surface morphologies, element content and bonding states of C/SiC composites were analysed in detail after machined by picosecond and femtosecond laser power respectively. For femtosecond laser machining, the amount of nanoparticles increased with increasing laser power. At 20 and 50 mW, Si-C, C-C and Si-O bonds existed in nanoparticles, while Si-C bonds disappeared at 70 mW. For picosecond laser machining, cauliflower-like particles and periodic ripple with certain depth were formed distinctly. Furthermore, thermal ablation phenomenon occurred, and only Si-O bonds existed in particles due to the oxidation of the carbon fibres and SiC matrix. The results showed that femtosecond laser with low power was more suitable to the surface machining due to better machining quality and less machining damage compared with high power picosecond laser.

A comparative study has been carried out on microstructure, ultrahigh temperature tensile properties, and erosion behavior of non-equilibrated four-directional reinforced carbon/carbon composites, prepared using polyacrylonitrile based carbon fibers as the reinforcement and coal-tar pitch as the matrix, to assess the effect of microstructural changes on the properties of the composites in an ultrahigh temperature environment. X-ray diffraction and scanning electron microscopic analyses suggest that the carbon matrix is highly graphitized, which is composed of mosaic and domain structures. The composites retain superior tensile properties with a visco-plastic behavior at ultrahigh temperature, which is consistent with the observation of mixed microstructural changes, crack propagation, and deflection as well as fiber debonding. The ablation behavior of non-equilibrated four-directional reinforced carbon/carbon composites is mainly dominated by thermo-chemical ablation and mechanical erosion, and different microstructures exhibit distinguished erosion mechanisms.