Ridge preservation measures, which include the filling of extraction sockets with bone substitutes, have been shown to reduce ridge resorption, while methods that do not require primary soft tissue closure minimize patient morbidity and decrease surgical time and cost. In a case series of 10 patients requiring single extraction, in situ hardening beta-tricalcium phosphate (β-TCP) granules coated with poly(lactic-co-glycolic acid) (PLGA) were utilized as a grafting material that does not necessitate primary wound closure. After 4 months, clinical observations revealed excellent soft tissue healing without loss of attached gingiva in all cases. At reentry for implant placement, bone core biopsies were obtained and primary implant stability was measured by final seating torque and resonance frequency analysis. Histological and histomorphometrical analysis revealed pronounced bone regeneration (24.4 ± 7.9% new bone) in parallel to the resorption of the grafting material (12.9 ± 7.7% graft material) while high levels of primary implant stability were recorded. Within the limits of this case series, the results suggest that β-TCP coated with polylactide can support new bone formation at postextraction sockets, while the properties of the material improve the handling and produce a stable and porous bone substitute scaffold in situ, facilitating the application of noninvasive surgical techniques.

In a dentate subject a jaw relation can either be determined in maximum intercuspation and is as such given by the occlusal morphology, or the mandibular position can be allocated according to the centric position of the condyles. For comprehensive restorative treatment or analytic measures of the occlusion it is important to record the centric condylar position. Various registration methods have been described in the literature, but there is no consensus on which is the 'best'. The aim of the present study was therefore to assess the accuracy of various registration methods and evaluate a possible influence of the used materials. Four dentists were involved in the clinical part of the study, another was responsible for the measurements. Impressions were taken from 81 fully dentate volunteers. The casts were mounted by face-bow transfer and central-bearing-point (CBP) registration into Dentatus articulators. Subsequently the centric condylar position was determined with six different methods and materials, respectively. Each method was reproduced twice so that a total of 18 registrations was performed per patient. The mandibular positions which resulted from the individual registrations were then repeatedly compared in the condylar area using a computer supported specially modified measuring articulator. The accuracy was found best for the unrefined wax wafer registration (x=0.33 mm) and with an average of 0.44 mm worst when using acrylic wafers. The CBP and frontal jig methods as well as tin-foil and refined wax wafers showed an accuracy in-between these boundaries. The biggest measured mandibular displacement between any two registrations were considerably 2.0 mm. However, the described differences in accuracy between the various methods and materials proved statistically not significant. All investigated jaw registrations showed an accuracy of about 20 times the tactile fine sensibility of natural teeth which has to be taken into account when inserting fixed prosthetic restorations in centric condylar position. Despite meticulous clinical and technical procedures small occlusal adjustments are therefore almost unavoidable.

No abstract

SUMMARY The habitual intercuspation is used ubiquitous for manufacturing small dental restorations. However, a little is known on its precision. The aim of the present study was therefore to investigate the unambiguity and accuracy of the habitual occlusion in mounted plaster casts from fully dentate persons. Eighty-one fully dentate volunteers, 36 women and 45 men aged 26AE8 AE 6AE2 years (18-55 years), with minor fillings and no signs or symptoms of TMD took part in the experiments. Silicone impressions were taken, poured with stone plaster and the obtained casts mounted into Dentatus ARLÒ -articulators using an individual face bow transfer. Subsequently, the models were transferred to a custom-made measuring articulator where the lateral leeway and the accuracy of the hand-held habitual intercuspation were quantified in the condylar area. Measurements were repeated seven times with the upper cast pushed either to the maximum right or the maximum left intercuspation. The hand-held habitual intercuspation of upper and lower cast proved ambiguous in 57% of pairs of casts. The average lateral leeway of the habitual intercuspation in the condylar area was 0AE10 AE 0AE05 mm (0-0AE51 mm; median 0AE07 mm) between the maximum right and left occlusal positions. The average accuracy of three repeated measurements was 0AE22 AE 0AE09 mm (0AE02-1AE17 mm; median 0AE16 mm). Natural occlusal surfaces in a full dentition do not guarantee an unambiguous habitual intercuspation of the plaster casts. The described leeway and technical limits might be possible causes for occlusal adjustments that are sometimes necessary when inserting restorations manufactured in habitual intercuspation.

No abstract