No abstract

No abstract

Single phase, adherent films of copper oxide nanowires (CuO NWs) were successfully grown on a glass substrate. Titanium nanofilm was pre-coated on the glass substrate to assist the growth of a layer adherent to the substrate. The copper film of 1.5 μm thickness was deposited via physical vapor deposition technique followed by thermal oxidation in air at various temperatures for 4 h. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible (UV-Vis) and Fourier transformation infrared (FT-IR) spectroscopy to find the crystal structure, morphology, phases, and optical properties of the deposited films. The CuO NWs film with 60% transmittance at wavelengths greater than 800 nm was obtained. It can be used as an infrared thermal imaging filter and in optoelectronic devices. The fabricated temperature sensor exhibited high sensitivity in the temperature range of 20 °C to 180 °C.

Tellurium dioxide (TeO 2 ) nanoparticles were synthesized directly by pulsed laser ablation using Nd:YAG, λ=1064nm laser in pure water. The AFM and XRD measurements, in combination with FTIR and UV-Vis spectroscopy have been employed for the characterization of the prepared samples. The effects of operating parameters on nanoparticles composition, production rate and size were also studied. The XRD measurements revealed crystallization structure of TeO 2 nanoparticles. The particle diameter by use of Scherer's equation was calculated to be about 28. nm and confirmed by AFM measurements. The UV-vis spectrum of the colloidal nanoparticles shows maximum absorbance around the UV region, indicating the formation of TeO 2 nanoparticles, which confirmed by FTIR.

No abstract