<span>The Advanced Microcontroller Bus Architecture (AMBA) is widely used in modern technology device. The design of bridge in the system is due to increase demand of power consumption and functionality. The bridge help to reduce power by separate the system into high bandwidth and low bandwidth. The goal of this paper is to design and implement the AMBA bridge into a SoC design which consists of a processor, RAM, ROM, watchdog and LED module. These peripherals are connected separately based on different bandwidth with a bridge as the medium. The result shown the bridge transfer a correct data from the ROM into the RAM. The experiment was carry out using Synopsys 2017 and Keil uVision.</span>

Abstract. Advanced Microcontroller Bus Architecture (AMBA) is one of the well-designed on chip communication system. It is designed for right first-time development with many processor and peripherals. In this paper, the different family of AMBA architecture such as AXI, APB, AHB are reviewed. In this work, the AMBA-Lite is used and implemented with a few peripherals and an ARM processor. The work is simulated using Synopsys and demonstrated on the Digilent Nexys4 DDR board and the software use to synthesis the design is Vivado 2016.2.