No abstract

No abstract

Present work gave a new method for preparing polymethyl(3,3,3‐trifluoropropyl)siloxane (PMTFPS) in the mixing chamber of a torque rheometer using sodium silanolate as initiator, and ethyl acetate (EA) and dimethyl sulfoxide (DMSO) as promoters. The promoting effect of EA in the anionic bulk polymerization of 1,3,5‐tris(trifluoropropylmethyl) cyclotrisiloxane (F3) was investigated in comparison with DMSO, a common promoter. Results showed that EA exhibited an effective promoting effect as DMSO did. When the polymerization was carried out for 4.0 min at 120°C in the presence of 0.30 mol L−1 EA, the maximum of number average molecular weight (Mn = 2.45 × 105 g mol−1) of PMTFPS was obtained with high yield (89.2 wt%). The back‐biting reactions during the polymerization were almost suppressed and less than 0.75 wt% cyclic by‐products were obtained by matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) for EA promoter system. Investigations of differential scanning calorimetry and thermogravimetic analysis showed that PMTFPS could be used in a wide range of operational temperatures. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers

No abstract

Fe(II) ethylenediaminetetraacetate (EDTA) chelate solution is generally considered to be an effective nitric oxide (NO) absorbent. However, since the ferrous active site is occupied by nitric oxide and the ferrous chelate is oxidized to ferric chelate by oxygen in air, its absorption capacity will gradually decrease with the NO absorption process. Here, we propose a method for regenerating the NO-attenuated Fe(II)EDTA solution by adding nanoscale zero-valent iron (NZVI) under three different pH conditions. Furthermore, compared with the commercially available iron powder, NZVI was also found to be effective not only for the regeneration of expired Fe-EDTA solution but also for the reduction of Fe(III) EDTA solution.According to the results obtained herein, different acidity levels of solution, from weakly acidic to near neutral, are all suitable for the regeneration-absorption process.