Co-free body-centered cubic (bcc) high-entropy alloys (HEAs) are prepared, and the elevated mechanical property and corrosion property of the Al0.4CrFe1.5MnNi0.5Mox (x = 0 and 0.1) alloys are studied. The Vickers hardness (HV) of the as-homogenized state is between HV 350 and HV 400. Both alloys are provided with nano-scale NiAl-rich B2 precipitates which contribute to the strength at high-temperature. In addition, adding Mo in the present alloy strengthens by σ phase. Al0.4CrFe1.5MnNi0.5Mo0.1 exhibited outstanding tensile properties, with a yield strength of 413 MPa and ultimate tensile strength of 430 MPa in the elevated tensile test at 600 °C, which is better than that of Al0.4CrFe1.5MnNi0.5 alloy. Through potentiodynamic polarization testing in 0.5 M H2SO4 solution and electrochemical impedance spectroscopy (EIS), it is shown that adding Mo can effectively reduce the corrosion current density and improve the impedance of passive film, since the passivation layer is formed and stable.

No abstract

The major challenge of high-temperature shape memory alloys (SMAs) is the collocation of phase transition temperatures (TTs: Ms, Mf, As, Af) with the mechanical properties required for application. Previous research has shown that the addition of Hf and Zr into NiTi shape memory alloys (SMAs) increases TTs. Modulating the ratio of Hf and Zr can control the phase transformation temperature, and applying thermal treatments can also achieve the same goal. However, the influence of thermal treatments and precipitates on mechanical properties has not been widely discussed in previous studies. In this study, we prepared two different kinds of shape memory alloys and analyzed their phase transformation temperatures after homogenization. Homogenization successfully eliminated dendrites and inter-dendrites in the as-cast states, resulting in a reduction in the phase transformation temperatures. XRD patterns indicated the presence of B2 peaks in the as-homogenized states, demonstrating a decrease in phase transformation temperatures. Mechanical properties, such as elongation and hardness, were improved due to the uniform microstructures achieved after homogenization. Moreover, we discovered that different additions of Hf and Zr resulted in distinct properties. Alloys with lower Hf and Zr had lower phase transformation temperatures, followed by higher fracture stress and elongation.