Crosslinked ethylene-vinyl acetate (EVA) copolymers with VA content of 28% by weight were prepared by a two-step method by evenly dispersing the crosslinking agent (dicumyl peroxide) into the EVA matrix and then crosslinking at elevated temperatures. The crosslinking features of the samples were analyzed by Soxhlet extraction with xylene and dynamic mechanical measurements. All the samples were crystalline at room temperature, and the chemical crosslinks seemed to have little effect on the melting behavior of polyethylene segment crystals in the EVA copolymers. The shape recovery results indicated that only those specimens that had a sufficiently high crosslinking degree (gel content higher than about 30%) were able to show the typical shape memory effect, a large recoverable strain, and a high final recovery rate. The degree of crosslinking can be influenced by the amount of the peroxide and the time and temperature of the reaction. The response temperature of the recovery effect (about 61°C) was related to the melting point of the samples. The EVA shape memory polymer was characterized by its low recovery speed that resulted from the wide melting range of the polyethylene segment crystals.

No abstract