No abstract

No abstract

No abstract

A study was undertaken to develop a prediction model of compressive strength for three types of high-porosity cast-in-situ foamed concrete (cement mix, cement-fly ash mix, and cement-sand mix) with dry densities of less than 700 kg/m3. The model is an extension of Balshin’s model and takes into account the hydration ratio of the raw materials, in which the water/cement ratio was a constant for the entire construction period for a certain casting density. The results show that the measured porosity is slightly lower than the theoretical porosity due to few inaccessible pores. The compressive strength increases exponentially with the increase in the ratio of the dry density to the solid density and increases with the curing time following the composite function A2ln⁡tB2 for all three types of foamed concrete. Based on the results that the compressive strength changes with the porosity and the curing time, a prediction model taking into account the mix constitution, curing time, and porosity is developed. A simple prediction model is put forward when no experimental data are available.

This study aims to investigate the effect of water on the properties of cast in situ foamed concrete with a dry density of 300–800 kg/m3 (100 kg/m3 is a gradient). Firstly, the shrinkage deformation with the curing time and the volumetric moisture content is studied by the drying shrinkage test and improved drying shrinkage test. Secondly, the influence of volumetric moisture content on mechanical properties is assessed. At last, the effects of immersion time and immersion type on the mechanical properties of foamed concrete are studied by considering the water-level conditions. The achieved results show that the shrinkage deformations increase with the curing time for the drying shrinkage test and the improved drying shrinkage test, while the variations are different. The shrinkage deformation increases with the decrease of volumetric moisture content for six dry densities of foamed concrete. Besides, it gradually changes in the early stage, while it changes fast in the later stage. The compressive strength and elastic modulus decrease with the increase of volumetric moisture content for each density. For the water-level unchanged condition, the compressive strength and elastic modulus initially decrease and then slowly increase with the increase of the immersion time. For the water-level changed condition, the compressive strength and elastic modulus of foamed concrete decrease with the increase of immersion time for each dry density, and the rate of early attenuation is high, whereas the rate of later attenuation is limited.