Urea formaldehyde coated waterborne acrylic resin microcapsules with core-wall ratios of 0.30, 0.45, 0.60, 0.67, and 0.75, and mass fractions of 1.0%, 4.0%, 7.0%, 10.0%, 13.0%, and 16.0% were prepared by in situ polymerization. Their micro morphology was examined by scanning electron microscope and infrared spectrum measurements. The gloss, color difference, adhesion, hardness, and impact resistance of the coating surface were investigated in detail. The influence of the core-wall ratio on the performance of the waterborne crackle coating on the wood surface and the self-healing performance were examined. The results showed that when the core-wall ratio of microcapsules was 0.67, an evenly dispersed powder state with particle size of about 3 μm microcapsules was obtained, and the highest coverage was achieved. When the mass fraction of the microcapsule was 4.0%, it had the optimum effect on surface performance. The adhesion was grade two, gloss was 10.9%, impact resistance was 15 kg·cm, chromatic aberration was 1.0, hardness was H, and it had the best effect on the healing of microcracks in the wood coating. As the coating added with microcapsules can inhibit the microcracks of the coating and plays a protective role for the substrate to achieve a self-healing effect, this study lays a technical foundation for the self-healing of surface cracks in coatings for wood.

Through the optimized preparation of tung oil microcapsules, five kinds of microcapsules containing different core material content were obtained to explore the influence of microcapsules on water-based paint film and the self-healing ability of microcapsules. The results showed that the microcapsules had good appearance, and the microcapsules were successfully prepared. The color difference in the paint film increased with the increase in microcapsule content, and the gloss decreased gradually. The mechanical test showed that adding microcapsules increased the toughness of the paint film to a certain extent, and the performance of the paint film was unchanged or better. The results showed that paint film with the core–wall ratio of 0.78:1 had the best performance and self-healing function when microcapsules were added.

In this paper, self-healing microcapsules with urea formaldehyde coated Nippon water-based acrylic acid were prepared, and the performance of water-based topcoat paint film added with self-healing microcapsules and the repair effect of microcapsules were investigated. The results show that when the content of microcapsules in water-based topcoat paint film on the surface of wood increased, the color difference and hardness rose gradually, the gloss and adhesion declined gradually, the impact resistance and tensile strength at break rose first and then declined. The 0.67:1 core-wall ratio microcapsules had a better micromorphology, and the water-based topcoat paint film with 0.67:1 microcapsules had a certain repair effect. The microcapsules were added to the water-based topcoat paint film to repair the coating to a certain extent, which provide technical reference for prolonging the service life of water-based topcoat paint film for the furniture surface.

Microcapsules of a waterborne core material were prepared using a waterborne primer. The microcapsules of the waterborne core material were added to the waterborne primer to explore the effects of different core–shell ratios and mass fractions of the microcapsules on the property of the waterborne primer coating on the wooden surface. The results show that as the mass fraction of the microcapsules increased, the chromatic aberration increased by degrees, the glossiness decreased gradually, and the hardness increased by degrees, whilst—except for the coating with 0.50:1 microcapsules—the adhesion decreased gradually. When the mass fraction of the microcapsules increased, the impact resistance increased first and decreased later, or remained unchanged after reaching a certain value. When the mass fraction of the microcapsules increased, the elongation at the break increased first and decreased later. When the core–shell ratio was small and the mass fraction was between 5.0% and 15.0%, the coating had better liquid resistance. When the core–shell ratio was 0.67:1 and the mass fraction was 10.0%, the overall property of the coating on the Basswood was the best. The technology of microencapsulation provides a technical reference for the waterborne primer with self-repair qualities on the surface of wooden products.

In a particular temperature range, 1, 2-benzo-6-diethylamino-fluorane microcapsules (fluorane microcapsules) exhibit a good color-changing function. For the coating on wood surfaces, embedding fluorane microcapsules, good weather resistance, light retention, color retention, impact resistance, and wear resistance are essential. However, the effect of fluorane microcapsule content on its properties has not been verified. Therefore, in this paper, the orthogonal test is designed with the fluorane microcapsule content, drying temperature, and drying time as test factors to identify the most influential factors. Then, by embedding microcapsules into the waterborne coating on wood substrates, the performance of the waterborne topcoat was investigated. The results show that the color of the waterborne topcoat with fluorane microcapsules on a basswood (Tilia europaea) surface can change between yellow and colorless when the temperature rises and falls, achieving reversible thermochromism. The activation temperature was 32 °C, and the range of discoloration temperature was 30–32 °C. The topcoat with a 15% fluorane microcapsule content had the best comprehensive performance. The color difference was 71.9 at 32 °C, the gloss was 3.9% at 60°, the adhesion grade was 0, the hardness was 2H, the impact resistance was 10 kg·cm, the elongation at the break was 15.56%, and liquid resistance was outstanding. After aging tests, the color difference of the topcoat with 15% fluorane microcapsules was more obvious. The damaged area of the topcoat with the addition of 15% fluorane microcapsules was smaller, indicating it had a better aging resistance. The experimental results lay the foundation for the preparation of intelligence-indicating and decorative waterborne coating.