No abstract

The development and performance of a perforated plate burner (PPB) operating using premixed natural gas and air at engine-relevant inlet temperatures and combustor pressures with thermal powers up to 1 MW is discussed. A significant benefit of using burners with simplified flow fields, such as the PPB, for experimental studies in the laboratory is the potential for decoupling the complex fluid dynamics in typical combustors from the chemical kinetics. The primary motivation for developing this burner was to use it as a source of vitiated flow with negligible swirl for reacting jet in vitiated crossflow experiments. The design methodology for the PPB is described, including plate geometry selection and flashback mitigation features. The stable operation of the PPB within a high-pressure test rig was validated: successful ignition, effective use of red-lines for flashback mitigation, and long duration steady-state operation in both piloted and nonpiloted modes were all observed. Exhaust gas emissions measured using a Fourier-transform infrared (FTIR) spectrometer showed very good performance of the PPB in terms of the combustion efficiency (based on measured CO and UHC), and a stability diagram of the PPB was developed as a function of the equivalence ratio and the PPB hole velocity. FTIR measurements also showed very low levels of NOX in nonpiloted operation that were generally within 3 ppm (reported dry and referenced to 15% O2). The capability for steady-state operation, high combustion efficiency, and low levels of NOX makes this PPB an excellent burner candidate for combustion experiments in the laboratory.

No abstract

An electro-optical shutter (EOS), comprising a Pockels cell located between crossed-axis polarizers, is integrated into a nanosecond coherent anti-Stokes Raman scattering (CARS) system. The use of the EOS enables thermometry measurements in high-luminosity flames through significant reduction of the background resulting from broadband flame emission. A temporal gating ≤100 ns along with an extinction ratio >10,000:1 are achieved using the EOS. Integration of the EOS enables the use of an unintensified CCD camera for signal detection, improving upon the signal-to-noise ratio achievable with inherently noisy microchannel plate intensification processes previously employed for short temporal gating. The reduction in background luminescence afforded by the EOS in these measurements allows the camera sensor to capture CARS spectra at a broad range of signal intensities and corresponding temperatures, without saturation of the sensor, thus enhancing the dynamic range of these measurements.

No abstract