Installation of offshore wind turbines (OWTs) requires careful planning to reduce costs and minimize associated risks. The purpose of this paper is to present a method for assessing the allowable sea states for the initial hammering process (shallow penetrations in the seabed) of a monopile (MP) using a heavy lift floating vessel (HLV) for use in the planning of the operation. This method combines the commonly used installation procedure and the time-domain simulations of the sequential installation activities. The purpose of the time-domain simulation is to quantitatively study the system dynamic responses to identify critical events that may jeopardize the installation and the corresponding limiting response parameters. Based on the allowable limits and the characteristic values of the limiting response parameters, a methodology to find the allowable sea states is proposed. Case studies are presented to show the application of the methodology. The numerical model of the dynamic HLV–MP system includes the coupling between HLV and MP via a gripper device, and soil–MP interaction at different MP penetration depths. It is found that the limiting parameters are the gripper force and the inclination of the MP. The systematic approach proposed herein is general and applies to other marine operations.

This paper deals with a general methodology for assessment of the operational limits and the operability of marine operations during the planning phase with emphasis on offshore wind turbine (OWT) installation activities. A systematic approach based on operational procedures and numerical analyses is used to identify critical events and corresponding response parameters. Identifying them is important for taking mitigation actions by modifying the equipment and procedures. In the proposed methodology, the operational limits are established in terms of allowable limits of sea states. In addition, the operational limits of a complete marine operation is determined by taking into account several activities, their duration, continuity, and sequential execution. This methodology is demonstrated in a case study dealing with installation of an offshore wind turbine monopile (MP) and a transition piece (TP). The developed methodology is generic and applicable to any marine operation for which operational limits need to be established and used on-board as a basis for decision-making towards safe execution of operations.

In this paper, a methodology suitable for assessing the allowable sea states for installation of a transition piece (TP) onto a monopile (MP) foundation with focus on the docking operation is proposed. The TP installation procedure together with numerical analyses is used to identify critical and restricting events and their corresponding limiting parameters. For critical installation phases, existing numerical solutions based on frequency and time domain (TD) analyses of stationary processes are combined to quickly assess characteristic values of dynamic responses of limiting parameters for any given sea state. These results are compared against (nonlinear and nonstationary) time domain simulations of the actual docking operations. It is found that a critical event is the structural damage of the TP's bracket supports due to the potential large impact forces or velocities, and a restricting installation event (not critical) is the unsuccessful mating operation due to large horizontal motions of the TP bottom. By comparing characteristic values of dynamic responses with their allowable limits, the allowable sea states are established. Contact–impact problems are addressed in terms of assumed allowable impact velocities of the colliding objects. A possible automatic motion compensation system and human actions are not modeled. This methodology can also be used in connection with other mating operations such as float-over and topside installation.

No abstract

Repair and replacement of offshore wind turbine blades are necessary for current and future offshore wind turbines. To date, repair activities are often conducted using huge jack‐up crane vessels and by applying a reverse installation procedure. Because of the high costs associated with installation and removal of offshore wind turbine components and the low profit margin of the offshore wind industry, alternative methods for installation and removal are needed. This paper introduces a novel concept for replacement or installation of offshore wind turbine blades. The concept involves a medium‐sized jack‐up crane vessel and a tower climbing mechanism. This mechanism provides a stable platform for clamping, lowering, and lifting of a blade. A case study of a 5‐MW offshore wind turbine is shown, where common engineering practices were applied and numerical simulations of the marine operations were carried out using finite element and multibody simulation tools. Operational limits for wave and wind actions were established to demonstrate the technical feasibility of the proposed concept.