Minimum-dissipation eddy-viscosity models are a class of sub-filter models for large-eddy simulation that give the minimum eddy dissipation required to dissipate the energy of sub-filter scales. A previously derived minimum-dissipation model is the QR model. This model is based on the invariants of the resolved rate-of-strain tensor and has many desirable properties. It appropriately switches off for laminar and transitional flows, has low computational complexity, and is consistent with the exact sub-filter tensor on isotropic grids. However, the QR model proposed in the literature gives insufficient eddy dissipation. It is demonstrated that this can be corrected by increasing the model constant. The corrected QR model gives good results in simulations of decaying grid turbulence on an isotropic grid. On anisotropic grids the QR model is not consistent with the exact sub-filter tensor and requires an approximation of the filter width. It is demonstrated that the results of the QR model on anisotropic grids are primarily determined by the used filter width approximation, and that no approximation gives satisfactory results in simulations of both a temporal mixing layer and turbulent channel flow. A new minimum-dissipation model for anisotropic grids is proposed. This anisotropic minimum-dissipation (AMD) model generalizes the desirable practical and theoretical properties of the QR model to anisotropic grids and does not require an approximation of the filter width. The AMD model is successfully applied in simulations of decaying grid turbulence on an isotropic grid and in simulations of a temporal mixing layer and turbulent channel flow on anisotropic grids.

The simulation of turbulent flows by means of computational fluid dynamics is highly challenging. The costs of an accurate direct numerical simulation (DNS) are usually too high, and engineers typically resort to cheaper coarse-grained models of the flow, such as large-eddy simulation (LES). To be suitable for the computation of turbulence, methods should not numerically dissipate the turbulent flow structures. Therefore, energy-conserving discretizations are investigated, which do not dissipate energy and are inherently stable because the discrete convective terms cannot spuriously generate kinetic energy. They have been known for incompressible flow, but the development of such methods for compressible flow is more recent. This paper will focus on the latter: LES and DNS for turbulent subsonic flow. A new theoretical framework for the analysis of energy conservation in compressible flow is proposed, in a mathematical notation of square-root variables, inner products, and differential operator symmetries. As a result, the discrete equations exactly conserve not only the primary variables (mass, momentum and energy), but also the convective terms preserve (secondary) discrete kinetic and internal energy. Numerical experiments confirm that simulations are stable without the addition of artificial dissipation. Next, minimum-dissipation eddyviscosity models are reviewed, which try to minimize the dissipation needed for preventing sub-grid scales from polluting the numerical solution. A new model suitable for anisotropic grids is proposed: the anisotropic minimum-dissipation model. This model appropriately switches off for laminar and transitional flow, and is consistent with the exact sub-filter tensor on anisotropic grids. The methods and models are first assessed on several academic test cases: channel flow, homogeneous decaying turbulence and the temporal mixing layer. As a practical application, accurate simulations of the transitional flow over a delta wing have been performed. The Compressible Navier-Stokes Equations Primary ConservationOur objective is the development of simulation methods for aerodynamic flow, governed by the Navier-Stokes equations for compressible flow [21]:

No abstract

No abstract