The present paper describes an experimental and numerical study concerning the impact of blunt steel projectiles against harder steel plates, at impact velocities between 200 and 800 m/s. In contrast with previously published observations, three modes of deformation and failure of the soft steel projectiles were observed in the present study. These included: Taylor cylinder mushrooming, sunflowerlike petalling and plugging perforation. Individual velocity ranges and the transitions between the deformation/failure modes are identified by both experiments and numerical simulations. Complex material failure mechanisms of projectile and target play conflicting roles in the various penetration stages. Johnson-Cook models of strength and accumulative damage failure are employed in 3D numerical simulation to describe material behavior of both projectile and target. Computational evolutions of each scenario are offered in detail to understand the deformation and failure of projectile and target plate.
The evolution of micro-damage and deformation of each phase in the composite plays a pivotal role in the clarification of deformation mechanism of composite. However, limited model and mechanical experiments were conducted to reveal the evolution of the deformation of the two phases in the tungsten fiber reinforced Zr-based bulk metallic glass composite. In this study, quasi-static compressive tests were performed on this composite. For the first time, the evolution of micro-damage and deformation of the two phases in this composite, i.e., shear banding of the metallic glass matrix and buckling deformation of the tungsten fiber, were investigated systematically by controlling the loading process at different degrees of deformation. It is found that under uniaxial compression, buckling of the tungsten fiber occurs first, while the metallic glass matrix deforms homogeneously. Upon further loading, shear bands initiate from the fiber/ matrix interface and propagate in the metallic glass matrix. Finally, the composite fractures in a mixed mode, with splitting in the tungsten fiber, along with shear fracture in the metallic glass matrix. Through the analysis on the stress state in the composite and resistance to shear banding of the two phases during compressive deformation, the possible deformation mechanism of the composite is unveiled. The deformation map of the composite, which covers from elastic deformation to final fracture, is obtained as well.
Based on the Alekseevski-Tate model, the present manuscript theoretically analyzes the interface defeat of cylindrical and conical-nosed long rods in their penetration process and the corresponding formulae of velocity decay and mass erosion of projectile are deduced out. In particular, with regarding the truth of quasi-static tail velocity of long rod in the interface defeat, the simplified and explicit analytical expressions of the dominated parameters with time, e.g. the tail velocity, eroded length and residual mass of the rod, are all formulated. Finally the kinetic energy loss of long rod is analyzed, and the effects of velocity decay and rod erosion on the kinetic energy loss of long rod are discussed. Especially, regarding the conical-nosed long rod, the effect of half apex angle on the kinetic energy loss is also analyzed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.