No abstract

The optical filter based on the micro–nano structure on the material surface is an important optical device, which is widely used in many fields. The filter is fabricated on the substrate with different shapes and sizes of micro–nano array structure, and the wavelength selectivity is realized by adjusting the processing parameters. In this paper, the finite-difference time-domain (FDTD) method is used to simulate the spectral properties of periodic array structures on the Au surface, and the spectral response characteristics of different surface structural parameters to the incident light are obtained. The simulation results show that the periodic pore array has a directional modulation function on the reflectivity and transmittance of the material surface. In the same circular aperture array structure, the wavelength selection ability is proportional to the interval distance of the array period, but the transmission peak linewidth decreases with the increase of the interval distance. The structural spectrum of the cylindrical array is closely related to the structural period. The period of the array structure increases in proportion, the center wavelengths of the reflection and transmission peak of the spectrum are red-shifted. When the height of the array structure increases proportionally, the positions of the center wavelengths of the reflection and transmission peak remain almost unchanged. When the period of the array structure increases, the center wavelength of the reflection and transmission peaks appear red-shifted, and the line width is also narrowed. For the periodic ring array structure, as the inner diameter increases, the reflection peak is significantly red-shifted, and the smaller the ring width, the faster the red-shift of the reflection peak with the wavelength. By controlling the ratio of inner diameter-to-outer diameter, the spectral characteristics of the structured surface can be effectively controlled. These simulation results provide a basis for the preparation of optical filters in the future and a new idea for the study of micro–nano characteristic structures on the surface of materials.

Perovskite materials and their applications in optoelectronics have attracted intensive attentions in recent years. However, in-depth understanding about their anisotropic behavior in ultrafast carrier dynamics is still lacking. Here we explore the ultrafast dynamical evolution of photo-excited carriers and photoluminescence (PL) based on our delicately-grown MAPbBr3 high-quality bulk single crystals and differently-oriented wafers. The distinct in-plane polarization of carrier relaxation dynamics of the (100), (110) and (111) wafers and their out-of-plane anisotropy in a picosecond time scale were found by femtosecond time- and angle-resolved transient transmission measurements, indicating the relaxation process dominated by optical/acoustic phonon interaction is related to the photoinduced transient structure rearrangements. Femtosecond laser two-photon fabricated patterns exhibit three orders of magnitude enhancement of emission due to the formation of tentacle-like microstructures. Such a ultrafast dynamic study carried on differently-oriented crystal wafers is believed to provide a deep insight about the photophysical process of perovskites and to be helpful for developing polarization-sensitive and ultrafast-responsive optoelectronic devices.