The present paper investigates the impact performance of woven-fabric carbon-fibre composites based upon both thermoplastic-and thermoset-matrix polymers under highvelocity impact loading by conducting gas-gun experiments at impact velocities of up to 100 m.s −1. The carbon-fibre reinforced-polymers (CFRPs) are impacted using soft-(i.e. gelatine) and hard-(i.e. aluminium-alloy) projectiles to simulate either a soft bird-strike or a hard foreign-body impact (e.g. runway debris), respectively, on typical composites employed in civil aircraft. The out-of-plane displacements of the impacted composite specimen are obtained by means of a three-dimensional Digital Image Correlation (DIC) system for the soft-projectile impact on the composites and the extent of damage is assessed both visually and by using portable C-scan equipment. The perforation resistance and energy absorbing capability of the composites are also studied by performing high-velocity impact experiments using the hard-projectile and the resulting extent and type of damage are identified. In addition, a Finite Element (FE) model is also developed to investigate the interaction between the projectile and the composite target.

A three-dimensional (3-D) Finite Element Analysis (FEA) model incorporating an elastic-plastic (EP) damage model, which was implemented as a user-defined material ('VUMAT') sub-routine in a FEA code ('Abaqus/Explicit'), is developed to simulate the impact response of carbon-fibre reinforcedplastic (CFRP) composites. The model predicts the load versus time and the load versus displacement responses of the composite during the impact event. Further, it predicts the extent, shape and direction of any intralaminar damage and interlaminar delaminations, i.e. interlaminar cracking, as a function of the depth through the thickness of the impacted CFRP test specimen, as well as the extent of permanent indention caused by the impactor striking the composite plate. To validate the model, experimental results are obtained from relatively low-velocity impact tests on CFRP plates employing either a matrix of a thermoplastic polymer, i.e. poly(ether-ether ketone), or a thermosetting epoxy polymer. The 3-D EP model that has been developed is shown to model successfully the experimentally-measured impact behaviour of the CFRP composites.

No abstract