Intercalation-type MoNb12O33 with a porous-microspherical nanoarchitecture is explored as the first molybdenum niobium oxide anode material for Li+ storage.

Niobates with shear ReO3 crystal structures are remarkably promising anode materials for Li+ batteries due to their large capacities, inherent safety, and high cycling stability. However, they generally suffer from limited rate capabilities rooted in their insufficient electronic and Li+ conductivities. Here, micrometer‐sized copper niobate (Cu2Nb34O87) bulk as a new anode material having a high electronic conductivity of 2.1 × 10−5 S cm−1 and an impressive average Li+ diffusion coefficient of ≈3.5 × 10−13 cm2 s−1 is exploited, which synergistically leads to an excellent rate capability (184 mAh g−1 at 10 C) while remaining a large reversible capacity and superior cycling stability. Moreover, the fast Li+ transport pathways of grain boundary (micrometer scale) → lattice deformation area (nanometer scale) → (010) crystallographic plane (angstrom scale) are demonstrated in Cu2Nb34O87. Therefore, these results could pave the way for practical application of Cu2Nb34O87 in high‐performance Li+ batteries.

This paper describes the syntheses and electrochemical properties of a new niobate compound, aluminum niobate (AlNb11O29), for Li+ storage. AlNb11O29-microsized particles and nanowires were synthesized based on the solid-state reaction and solvothermal methods, respectively. In situ X-ray diffraction results confirmed the intercalating mechanism of Li+ in AlNb11O29 and revealed its high structural stability against cycling. The AlNb11O29 nanowires with a novel bamboo-like morphology afforded a large interfacial area and short charge transport pathways, thus leading to the observed excellent electrochemical properties, including high reversible Li+-storage capacity (266 mA h g–1), safe operating potential (around 1.68 V), and high initial Coulombic efficiency (93.3%) at 0.1 C. At a very high rate (10 C), the AlNb11O29 nanowires still exhibited a capacity as high as 192 mA h g–1, indicating their good rate capability. In addition, at 10 C, 96.3% capacity was retained over 500 cycles, indicating superior cycling stability. A full cell fabricated with AlNb11O29 nanowires as the anode and LiNi0.5Mn1.5O4 microparticles as the cathode delivered a high energy density of 390 W h kg–1 at 0.1 C. This work suggests that the AlNb11O29 nanowires hold a great promise for the development of high-performance lithium-ion batteries for large-scale energy-storage applications.