No abstract

No abstract

A series of copolymers P(MMA-NVP) composed of methyl methacrylate (MMA) and N-vinyl pyrrolidone (NVP) were prepared by a solution copolymerization technique. The copolymer could absorb and capture amount of liquid electrolyte within its chain networks structure to form quasi-solid-state electrolyte. The influences of synthesis conditions for copolymers, such as the content of NVP, the amount of initiator 2,2’-azobisisobutyronitrile(AIBN), and the amount of crosslinking agent triethylene glycol dimethacrylate(TEGDMA) on the ionic conductivity of quasi-solid electrolyte were investigated. The highest conductivity of the copolymer gel was 2.17mS/cm at 25°C. Based on the copolymer gel electrolyte, a dye-sensitized solar cell was fabricated with short-circuit current of 12.16mA/ cm2, open circuit voltage of 619mV, fill factor of 0.4633 and an overall conversion efficiency of 3.05 % under 100 mW/cm2 irradiation (AM1.5).

A series of copolymers P(VP-HEMA) composed of hydroxyl ethyl methacrylate (HEMA) and 4-vinyl pyridine (VP) were prepared by a solution copolymerization technique. Based on the copolymer P(VP-HEMA) prepared by the content of VP 50%, the amount of AIBN 3% and the optimized liquid electrolyte, a polymer solution electrolyte with concentration of 9.0% was formed. By addition of 1,4-dibromobutane into the solution, the copolymer gel electrolyte with higher conductivity 6.14mS/cm was prepared. Gelation is caused by the quaterisation between the group of pyridine in P(HEMA-VP) and 1,4-dibromobutane. Based on the copolymer gel electrolyte, a dye-sensitized solar cell was fabricated with short-circuit current of 13.62mA/cm2,open circuit voltage of 0.72V, fill factor of 0.5465 and an overall conversion efficiency of 5.24% under irradiation 100mW/cm2(AM1.5).