No abstract

SASE1 is the first beamline of the European XFEL that became operational in 2017. It consists of the SASE1 undulator system, the beam transport system, and the two scientific experiment stations: Single Particles, Clusters, and Biomolecules and Serial Femtosecond Crystallography (SPB/SFX), and Femtosecond X‐ray Experiments (FXE). The beam transport system comprises mirrors to offset and guide the beam to the instruments and a set of X‐ray optical components to align, manipulate and diagnose the beam. The SASE1 beam transport system is described here in its initial configuration, and results and experiences from the first year of user operation are reported.

In the present study, we proposed a new type of autocollimator for high-accuracy angular measurement within a large angle range. The new system comprises a traditional autocollimator and Risley prisms, and it employs the normal tracing method to measure the angle. By rotating the Risley prisms, the outgoing beam of the autocollimator can be deflected close to the normal direction of the reflecting mirror and then reflected back to the system by the mirror along the near normal direction to realize normal tracing. Based on the angle measured by the autocollimator and the rotation angles of Risley prisms, we can calculate the tilt angle of the mirror. Since the beam returns to the system close to the original path, the angle error caused by aberration, optical component processing defects, nonuniform refractive index, and so on, can be ignored. Due to the normal tracing measurement method, theoretically, the angle error is not affected by the working distance. ZEMAX non-sequential simulation shows that the angle error caused by aberration in the new system can be significantly reduced.