We propose an in-line digital microscopic holography system for testing of microstructures. With the incorporation of a long-distance microscope with digital holography, the system is capable of imaging test microstructures with high resolution at sufficient working distances to permit good illumination of samples. The system, which was developed in an in-line configuration, achieves high imaging capacity and exhibits properties that are favorable for micromeasurement. We demonstrate the performance of the system with experiments to determine the displacement of a silicon microcantilever and with investigations of the microscopic resolution capability.
Porous graphitic carbon of high specific surface area of 1416 m(2) g(-1) and high pore volume of 1.11 cm(3) g(-1) is prepared by using commercial CaCO3 nanoparticles as template and sucrose as carbon source followed by 1200 °C high-temperature calcination. Sulfur/porous graphitic carbon composites with ultra high sulfur loading of 88.9 wt % (88.9%S/PC) and lower sulfur loading of 60.8 wt % (60.8%S/PC) are both synthesized by a simple melt-diffusion strategy, and served as cathode of rechargeable lithium-sulfur batteries. In comparison with the 60.8%S/PC, the 88.9%S/PC exhibits higher overall discharge capacity of 649.4 mAh g(-1)(S-C), higher capacity retention of 84.6% and better coulombic efficiency of 97.4% after 50 cycles at a rate of 0.1C, which benefits from its remarkable specific capacity with such a high sulfur loading. Moreover, by using BP2000 to replace the conventional acetylene black conductive agent, the 88.9% S/PC can further improve its overall discharge capacity and high rate property. At a high rate of 4C, it can still deliver an overall discharge capacity of 387.2 mAh g(-1)(S-C). The porous structure, high specific surface area, high pore volume and high electronic conductivity that is originated from increased graphitization of the porous graphitic carbon can provide stable electronic and ionic transfer channel for sulfur/porous graphitic carbon composite with ultra high sulfur loading, and are ascribed to the excellent electrochemical performance of the 88.9%S/PC.
The behavior of individual nanocrystals during superlattice phase transitions can profoundly affect the structural perfection and electronic properties of the resulting superlattices. However, details of nanocrystal morphological changes during superlattice phase transitions are largely unknown due to the lack of direct observation. Here, we report the dynamic deformability of PbSe semiconductor nanocrystals during superlattice phase transitions that are driven by ligand displacement. Real-time high-resolution imaging with liquid-phase transmission electron microscopy reveals that following ligand removal, the individual PbSe nanocrystals experience drastic directional shape deformation when the spacing between nanocrystals reaches 2 to 4 nm. The deformation can be completely recovered when two nanocrystals move apart or it can be retained when they attach. The large deformation, which is responsible for the structural defects in the epitaxially fused nanocrystal superlattice, may arise from internanocrystal dipole–dipole interactions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.