No abstract

The influence of a magnetic field of 1.2–1.3 T on the variation of the fatigue behaviors and the mechanical properties of a 35CrMo steel after fatigue tests are investigated in this paper, in order to provide a basic guidance on the application in the similar environment of electrical machinery or vehicles. The microstructures of samples tested with and without magnetic fields are observed and analyzed by XRD, SEM, and TEM techniques. The fatigue life cycles are slightly increased by about 10–15% under magnetic field of 1.2–1.3 T according to the experimental results. A small increment of yield strength under fatigue life cycles of 10,000, 50,000, and 100,000 times is caused by the magnetic field, although the enhancement is only of 5–8 MPa. The dislocation density of the specimen is increased and the uniformity of dislocations is improved by magnetic fields applied during fatigue tests under the same load and cycles. The formation of micro-defects or micro-cracks will be postponed by the improvement in homogeneity of the material, leading to the increase of mechanical properties. The strengthening mechanisms such as deformation hardening and dislocation hardening effects are enhanced by the dislocation entangled structures and the higher density caused by magnetic field.

No abstract

Revealing the recrystallization behavior and mechanism of this new alloy is of great significance to subsequent research. In this study, the Ni-36.6W-15Co ternary medium heavy alloy was solution-treated at 1100–1200 °C for different lengths of time. The grain size change, microstructure and texture evolution as well as twin development during recrystallization annealing were analyzed using SEM, EBSD and TEM techniques. The study found that complete recrystallization occurs at 1150 °C/60 min. In addition, it takes a longer amount of time for complete recrystallization to occur at 1100 °C. The value of the activation energy Q1 of the studied alloys is 701 kJ/mol and the recrystallization process is relatively slow. By comparing the changes of microstructure and texture with superalloys, it is found that the recrystallization mechanism of the studied alloy is different from that of the superalloy. The development of annealing twins has a great influence on the recrystallization behavior and mechanism. The results show that the twin mechanism is considered as the dominant recrystallization mechanism of the studied alloy, although the formation and development of sub-grains appear in the early stage of recrystallization.