No abstract

No abstract

Splitting methods play a significant role in the coproduction of tight reservoirs which are characterized by vertical multilayer superimposition. It directly affects the accuracy of reservoir performance analysis and detailed descriptions. However, conventional splitting methods are limited to a few factors and static factors without considering the effect of layer parameter change. In this study, sensitivity analysis was carried out on five factors that affect the production splitting in coproduction wells. The research shows that in the production process, multiple parameters have a direct impact on the production of layers. Different parameters, which have to be included to split production, have different scale effects on layer production. Comparing the results of the KH method with the numerical simulation results, the limitation of the KH method for yield splitting is illustrated. A novel dynamic splitting method for production (DPSM) was proposed. This method is based on two primary methods, which are the multifactor static method for production splitting of gas (GPSM) and water (WPSM) and use the catastrophe theory and material balance equation (MBE) and obtain the final results by iterative method. The advantage of this method is that more accurate results in the production process are obtained by selecting eight factors, which contain 6 static factors and 2 dynamic factors, for research. It is more in line with the production practice that the ultimate results of production splitting vary with the production process. The accuracy and practicality of the results had been verified by numerical simulation. This method has practical significance for production splitting in tight gas reservoirs.

The hydraulic refracturing operations are often used to improve oil deliverability in the low-permeability reservoir. When the development of oilfields has entered a high water cut stage, oil deliverability can be promoted by refracturing reservoirs. The orientation of the new fracture formed by refracturing will be changed. The new formed fracture is called reorientation fracture. To calculate the oil deliverability of the refracture wells, a three-section fracture which includes reorientation fracture was established. The multiwell pressure drop superposition theory is used to derive the analytical solution of the refracture wells which includes the reorientation fracture. The numerical simulation was conducted to validate the results of the analytical solution. Comparing the refracture well deliverability of reorientation and nonreorientation, permeability, deflection angle, and the length of reorientation fracture will jointly control the productivity of refracture well. When the permeability in the direction of maximum principal stress is greater than the permeability in the direction of minimum principal stress, the capacity of reorientation fractures is relatively large. The deflection angles and the length of the reorientation fracture will directly affect the drainage area of the fracture, thus affecting productivity. The reorientation fractures generated by repeated fracturing have great potential for improving oil deliverability in the anisotropic low-permeability reservoirs.