Fe 3 O 4 magnetic nanoparticles (MNPs) were synthesized by a co-precipitation method using sodium citrate and oleic acid as modifiers. Phase composition and microstructure analysis indicate that the sodium citrate and oleic acid have been successfully grafted onto the surface of Fe 3 O 4 MNPs. The magnetic behaviors reveal that the modification can decrease the saturation magnetization of Fe 3 O 4 MNPs due to the surface effect. Fe 3 O 4 MNPs modified by sodiumcitrate and oleic acid show excellent dispersion capability, which should be ascribed to the great reduction of high surface energy and dipolar attraction of the nanoparticles.

Mesoscale CdTe helices with near-unity enantiomeric excess offer insight into design rules for chiroptical semiconductor materials.

No abstract

Graphene oxide (GO) films with two-dimensional structure were successfully prepared via the modified Hummer method. It is proven that redox method is a promising way to synthesize GO films on a large scale. Comprehensive characterizations of the properties of GO films were conducted. TEM and DFM analyses showed that GO sheets prepared in this study had single and double lamellar layer structure and a thickness of 2~3 nm. X-ray diffraction (XRD) was selected to measure the crystal structure of GO sheet. Fourier-transform infrared spectra analyzer (FT-IR) was used to certify the presence of oxygen-containing functional groups in GO films. The tests of UV-VIS spectrometer and TGA analyzer indicated that GO sheet possessed excellent optical response and outstanding thermal stability. Elemental analyzer (EA) and X-ray photoelectron spectroscope (XPS) analyzed the components synthetic material. Simultaneously, chemical structure of GO sheet was described in this study. Discussion and references for further research on graphene are provided.

Sun-driven steam generation is now possible and has the potential to help meet future energy needs. Current technologies often use solar condensers to increase solar irradiance. More recently, a technology for solar steam generation that uses heated surface water and low optical concentration is reported. In this work, a commercially available activated carbon fiber felt is used to generate steam efficiently under one sun illumination. The evaporation rate and solar conversion efficiency reach 1.22 kg m h and 79.4%, respectively. The local temperature of the evaporator with a floating activated carbon fiber felt reaches 48 °C. Apart from the high absorptivity (about 94%) of the material, the evaporation performance is enhanced thanks to the well-developed pores for improved water supply and steam escape and the low thermal conductivity, which enables reduced bulk water temperature increase. This study helps to find a promising material for solar steam generation using a water evaporator that can be produced economically (∼6 $/m) with long-term stability.