In this study a hybrid finite element-statistical energy analysis (FE-SEA) method is used to investigate the structure-borne noise of a steel-concrete composite railway bridge. The rail is represented by an infinite Timoshenko beam connected to the sleepers which are regarded as finite Timoshenko beams supported in ballast.The fasteners and ballast are simplified as a series of springs with complex stiffness. This model allows the receptance of the track to be determined. The wheel-rail forces are computed in the frequency domain from the contact-filtered roughness and the receptances of the wheel, track, and contact. The forces transmitted to the bridge are determined by substituting the wheel-rail forces into the equation of motion for the track. This model could also be applied to a slab track mounted on a bridge. A hybrid FE-SEA method is introduced in which FE is used to model the concrete deck and SEA is used to model the steel girders. This enables the computation of the vibration and noise of the composite railway bridge. The proposed method is verified by comparing its predictions with field measurements. The structure-borne noise level of the bridge is found to increase with train speed v by approximately 20lg(v). It is shown that the adjacent spans in a multi-span bridge can be ignored in deriving the bridge-borne noise at receiver points in the middle of the main span, provided that the distance to the track centreline is less than 0.3 times the length of the main span.

No abstract