Water injection, air injection, air foam injection, and in-situ combustion technology are used step by step in the later period of oilfield. Oxygen corrosion caused by different development methods has become a problem that could not be ignored. In this paper, the mechanism of oxygen corrosion, the influencing factors of oxygen corrosion and the new progress of oxygen corrosion countermeasures in recent years are systematically analyzed. Anticorrosion methods for different development modes are put forward. The direction of further research on oxygen corrosion in oilfield development is proposed: ○1Prediction and control of corrosion in oxygen environment need to be further studied to better guide corrosion protection in high temperature injection and production of oil and gas wells. ○2The research of anticorrosive coating materials and corrosion inhibitor technology needs to be further developed in the direction of safety and environment-friendly.

No abstract

This article demonstrates a method to make classification and dosing control for oil wells. To find the main factors that caused the corrosion and scaling in oil wells, water quality data of one oil production plant were made principal component analysis. Then the oil wells were divided into four types by using spss19.0 clustering analysis software according to the differences among main factors. Finally, wells dosing were applied in the field according to the classification. The effect is obvious, the corrosion inhibition rate can reach 70% above, and scale inhibition rate of calcium carbonate can reach 90% above. Costs savings of all the wells add up to 5390 thousands.

In view of the traditional inorganic cement-based material hydration shrinkage caused by the impact of performance defects range of application, applying the principle of doping dispersion and compact packing, a multistage resin composite ductile cement slurry system with different temperatures was constructed. The compatibility, thickening and mechanical evaluation tests were carried out to optimize the resin type, doping amount and method. The results show that the thickening of the composite system is controllable, and the addition of resin is beneficial to improve the elastic deformation, whereas easy to pile up if adding extra amounts, and the compressive strength reduced. At the same time, adding resin first is beneficial to disperse in the cement gap. Compared with cement-based materials, the compressive strength increased 7% to 13%, the elastic modulus decreased 10% to 15%, and the deformation capacity increased 14% to 22%. Field test shows that it has good sealing performance and remarkable effect of oil increasing and dewatering, which provides a new technical means for controlling casing leakage and ensuring its normal production.

No abstract