No abstract

In more electric aircraft (MEA) weight reduction and energy efficiency constitute the key figures. Additionally, the safety and continuity of operation of its electrical power distribution system (EPDS) is of critical importance. These sets of desired features are in disagreement with each other, because higher redundancy, needed to guarantee the safety of operation, implies additional weight. In fact, EPDS is usually divided into isolated sections, which need to be sized for the worst-case scenario. Several concepts of EPDS have been investigated, aiming at enabling the power exchange among separate sections, which allows better optimization for power and weight of the whole system. In this paper, an approach based on the widespread use of multi-port power converters for both DC/DC and DC/AC stages is proposed. System integration of these two is proposed as a multiport power conversion system (MPCS), which allows a ring power distribution while galvanic isolation is still maintained, even in fault conditions. Thus, redundancy of MEA is established by no significant weight increase. A machine design analysis shows how the segmented machine could offer superior performance to the traditional one with same weight. Simulation and experimental verifications show the system feasibility in both normal and fault operations.

No abstract

No abstract

Electric variable speed drives (VSDs) based on two VSDs connected to a multiphase machine are an attractive solution to replace high-power mechanic and hydraulic systems in many sectors of industry and transportation because they present high performance with reduced cost, volume and weight. Among the causes which affect the reliability of dual VSDs, the common-mode current flowing through the machine bearing is an important issue. This paper faces the mitigation of the common-mode current by reducing the common-mode voltage (CMV) generated by the operation of a dual VSD. The CMV reduction is carried out without introducing any extra device and/or passive filtering method. This CMV reduction is performed by applying a specific phase-displacement between the modulation strategies of each single inverter drive. The proposed technique has been evaluated in a down scaled experimental setup in order to test its effectiveness.INDEX TERMS Harmonic analysis, Pulse width modulation, Common-mode voltage.