Activated carbon prepared from grapefruit peel, an agricultural solid waste by-product, has been used for the adsorption of Cr(VI) from aqueous solution. The effects of adsorbent dosage, pH and temperature on adsorption of Cr(VI) were investigated. The maximum adsorption yield was obtained at the initial pH of 3. The dynamical data fit very well with the pseudo-second-order kinetic model and the calculated adsorption capacities (23.98, 24.33 and 24.81 mg/g) were in good agreement with experiment results at 20°C, 30°C and 40 °C for the 100 mg/L Cr(VI) solution. The Freundlich model (R2 values were 0.9198-0.9871) fitted adsorption data better than the Langmuir model. The calculated parameters confirmed the favorable adsorption of Cr(VI) on the activated carbon prepared from grapefruit peel.

Three Leersia hexandra populations were cultivated in 20% and 80% Cr3+concentration and their heavy metal contents was determined with flame atomic absorption spectrophotometry. Population in Lipu was found the best Cr Hyperaccumulator test plant. The interactive effects of soil moisture and light for growth showed Leersia hexandra grew fastest under 50% soil moisture content, medium illumination and appropriate fertilizing.Results of the biochemical parameters showed decrease in amounts of soluble sugars and ascorbic acid and an increase in total chlorophyll and protein in Leersia hexandra grown in ideal conditions as compared to others.These results provide more effective approach for improving biomass of Leersia hexandra, and applied it into restoration of contaminated water and soils .

In this study, a Fe(III)-impregnated sorbent was prepared from sugarcane bagasse and FeCl3 solution via carbonization/activation in a muffle furnace at 500 °C for 4h. Batch experiments were carried out to determine the capacity of the Fe(III)-impregnated sorbent to adsorb As(V) from aqueous solution. The dynamical data fitted very well with the pseudo-second-order kinetic model and the calculated adsorption capacities of 4.8263, 5.2219 and 7.1225 mg/g were equal to the actual values of the experiments at temperatures of 20, 25, and 35 °C, respectively. The experimental data were modeled by Langmuir and Freundlich isotherm models. The Langmuir isotherm with R2 values of 0.9926-0.9968 could yield better fits than the Freundlich isotherm, and the adsorption was endothermic, indicating monolayer adsorption of As(V).Freundlich isotherm, and the adsorption was endothermic, indicating monolayer adsorption of As(V).