Ketonic carbonyl groups are catalytic active sites for oxidative dehydrogenation (ODH) reactions on carbon nanotubes. The quantity of these groups could be calculated from chemical titration with hydrazine compounds. ODH catalytic activity of nanocarbon is directly correlated with surface concentration of ketonic carbonyl groups, and the turnover frequency normalized by the number of active sites reflects the intrinsic activity of nanocarbon catalysts.

Carbon dioxide buildup in large-scale reactors can be detrimental to cell growth and productivity. In case of protein X, a therapeutic glycoprotein, when cultures were scaled up from bench scale to the pilot plant, there was a 40% loss of specific productivity. The dissolved CO(2) (dCO(2)) level was 179 +/- 9 mmHg at the pilot plant scale and 68 +/- 13 mmHg at bench scale. The authors proposed a comprehensive approach to maintain dCO(2) levels between 40 and 120 mmHg throughout the 14-day fed-batch process. A cell-free experiment was used to investigate the impact of the following parameters on dCO(2) removal: (1) sparge rate, (2) agitator speed, (3) bubble size, (4) bicarbonate concentration, (5) impeller position, and (6) aeration rate at the headspace of bioreactor. dCO(2) was measured using a fiber optic based probe. dCO(2) removal rate was a strong function of sparge rate and a weak function of agitator speed. Bubble size was modulated by the presence or absence of a sparge stone (10 microm pore size, 1 cm pipe i.d.). Open pipe provided 3- to 4-fold better dCO(2) removal for the same mass transfer coefficient (k(L)a) value. A mathematical model and a bench-scale experiment indicated that the benefit of a lower level of sodium bicarbonate in the culture medium was transient for batch and fed-batch cultures. Thus, this strategy was not used at pilot scale. Decreasing top impeller position improved k(L)a of dCO(2) by 2-fold. Changing headspace aeration rate from 0.02 to 0.04 vvm had no impact on dCO(2) removal. Two pilot runs were conducted using (A) open pipe and (B) antifoam in the presence of sparge stone, both in conjunction with lower impeller position. The presence of antifoam may interfere in product purification; however, demonstration of antifoam removal can be difficult. Open pipe allowed an alternative to using antifoam, as foam level with open pipe was significantly less. Both strategies successfully reduced dCO(2) level by 2.5-fold (179 +/- 9 vs 72 +/- 9 mmHg). Titer at day 10 of culture improved by 1.5-fold. Specific productivity improved by 41%. Historically, cultures were harvested around day 9-11 because of the high amount of foam; both strategies allowed the cultures to be extended up to day 14, resulting in 2-fold higher titer compared to that of the historical control without compromising protein quality.

Nitrogen-containing mesoporous carbon nanospheres have been prepared through an aqueous self-assembly process with F127 as a template and morphological control agent, and 3-aminophenol as carbon and nitrogen sources.

Because the presence of sialic acid can extend circulatory lifetime, a high degree of sialylation is often a desirable feature of therapeutic glycoproteins. In this study, the incomplete intracellular sialylation of interferon-gamma (IFN-gamma), produced by Chinese hamster ovary cell culture, was minimized by supplementing the culture medium with N-acetylmannosamine (ManNAc), a direct intracellular precursor for sialic acid synthesis. By introducing 20 mM ManNAc into the culture medium, incompletely sialylated biantennary glycan structures were reduced from 35% to 20% at the Asn97 glycosylation site. This effect was achieved without affecting cell growth or product yield. The intracellular pool of CMP-sialic acid, the nucleotide sugar substrate for sialyltransferase, was also extracted and quantified by HPLC. Feeding of 20 mM ManNAc increased this intracellular pool of CMP-sialic acid by nearly thirtyfold compared with unsupplemented medium. When radiolabeled ManNAc was used to trace the incorporation of the precursor, it was found that supplemental ManNAc was exclusively incorporated into IFN-gamma as sialic acid and that, at 20 mM ManNAc feeding, nearly 100% of product sialylation originated from the supplemental precursor.

Carbon nanotubes (CNTs) were covalently functionalized via 1,3-dipolar cycloaddition reaction under microwave conditions. The functionalized CNTs were characterized by thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), N2 adsorption isotherms and Raman spectroscopy. The surface concentration of phenolic hydroxyl groups on the surface of CNTs was adjusted by varying the reaction temperature. In addition, we prepared Pd nanoparticle/CNT (Pd NP/CNT) nanocomposites through strong electrostatic adsorption and hydrogen reduction. The results indicated that the functional groups could not only improve the dispersion of CNTs in water, but also enhance the interaction between Pd precursors and CNTs, thus preventing small Pd NPs (average diameter of 1.5 nm) from agglomerating. Furthermore, the Pd NP/CNT-220 nanocomposites showed high catalytic activity for the reduction of 4-nitrophenol. The turnover frequency (TOF) of this catalyst was up to 18 min(-1), which was attributed to the small size and uniform distribution of Pd NPs on the surface of CNTs.