Electrospun superhydrophobic organic/inorganic composite nanofibrous membranes exhibiting excellent direct contact membrane distillation (DCMD) performance were fabricated by a facile route combining the hydrophobization of silica nanoparticles (SiO2 NPs) and colloid electrospinning of the hydrophobic silica/poly(vinylidene fluoride) (PVDF) matrix. Benefiting from the utilization of SiO2 NPs with three different particle sizes, the electrospun nanofibrous membranes (ENMs) were endowed with three different delicate nanofiber morphologies and fiber diameter distribution, high porosity, and superhydrophobic property, which resulted in excellent waterproofing and breathability. Significantly, structural attributes analyses have indicated the major contributing role of fiber diameter distribution on determining the augment of permeate vapor flux through regulating mean flow pore size (MFP). Meanwhile, the extremely high liquid entry pressure of water (LEPw, 2.40 ± 0.10 bar), robust nanofiber morphology of PVDF immobilized SiO2 NPs, remarkable mechanical properties, thermal stability, and corrosion resistance endowed the as-prepared membranes with prominent desalination capability and stability for long-term MD process. The resultant choreographed PVDF/silica ENMs with optimized MFP presented an outstanding permeate vapor flux of 41.1 kg/(m(2)·h) and stable low permeate conductivity (∼2.45 μs/cm) (3.5 wt % NaCl salt feed; ΔT = 40 °C) over a DCMD test period of 24 h without membrane pores wetting detected. This result was better than those of typical commercial PVDF membranes and PVDF and modified PVDF ENMs reported so far, suggesting them as promising alternatives for MD applications.

Membrane structure design is critical for the development of high-performance hemodialysis membranes. Here, a thin-film nanofibrous composite (TFNC) membrane, consisting of a two-tier composite structure, i.e., an ultrathin hydrophilic separation layer of chemically cross-linked polyvinyl alcohol (PVA), and an electrospun polyacrylonitrile (PAN) nanofibrous supporting layer, was demonstrated as the hemodialysis membrane for the first time. The optimized PVA/PAN TFNC membrane exhibited high permeability (~ 290.5 L/m 2 h at 0.1 MPa) and excellent selectivity which should be attributed to its unique structure with ultrathin separation layer and highly porous supporting layer. In addition, the TFNC membrane also possessed excellent overall mechanical properties, good hydrophilicity and comparable hemocompatibility properties (protein adsorption, platelet adhesion, complement activation, hemolysis ratio). The hemodialysis simulation experiments on optimized TFNC membrane showed that 82.6% of urea and 45.8% of lysozyme were cleaned and 98.8% of bovine serum albumin (BSA) was retained. The TFNC membranes exhibited excellent hemodialysis performances, especially for the middle-molecule uremic toxin removal, which was more efficient than conventional hemodialysis membranes reported so far, suggesting PVA/PAN TFNC membranes as promising alternatives for hemodialysis applications.

Novel low pressure UV-cured chitosan–polyethylene oxide–polytriethylene glycol dimethacrylate/polyacrylonitrile (CS–PEO–PTEGDMA/PAN) thin film nanofibrous composite nanofiltration membranes for anionic dye separation are demonstrated.

A novel thin-film nanofibrous composite (TFNC) membrane with a robust graphene oxide barrier layer assisted by PVA for efficient pervaporation desalination.