Thermally conductive functionalized multilayer graphene sheets (fMGs) are efficiently aligned in large-scale by a vacuum filtration method at room temperature, as evidenced by SEM images and polarized Raman spectroscopy. A remarkably strong anisotropy in properties of aligned fMGs is observed. High electrical (∼386 S cm(-1)) and thermal conductivity (∼112 W m(-1) K(-1) at 25 °C) and ultralow coefficient of thermal expansion (∼-0.71 ppm K(-1)) in the in-plane direction of A-fMGs are obtained without any reduction process. Aligned fMGs are vertically assembled between contacted silicon/silicon surfaces with pure indium as a metallic medium. Thus-constructed three-dimensional vertically aligned fMG thermal interfacial material (VA-fMG TIM) architecture has significantly higher equivalent thermal conductivity (75.5 W m(-1) K(-1)) and lower contact thermal resistance (5.1 mm2 K W(-1)), compared with their counterpart from A-fMGs that are recumbent between silicon surfaces. This finding provides a throughout approach for a graphene-based TIM assembly as well as knowledge of vertically aligned graphene architectures, which may not only facilitate graphene's application in current demanding thermal management but also promote its widespread applications in electrodes of energy storage devices, conductive polymeric composites, etc.

No abstract

Liquid crystals (LCs) are self-organizing anisotropic viscoelastic soft materials that flow like viscous liquids and display anisotropies like crystals. When a nematic liquid crystal is confined to a capillary tube with strong anchoring conditions, disclination defects of higher (+1) and lower (+1/2) topological charges can coexist, connected through a defect branch point. The shape of the +1/2 disclination lines emanating from the branch point are functions of confinement and bulk elasticity. Previous work shows that nematic liquid crystals under cylindrical confinement display a radial (one +1 line)-to-planar polar (two +1/2 lines) defect texture transition through the nucleation and uniform motion of a disclination branch point. Here we present analysis, scaling and modeling based on a non-linear non-local nematic elastic equation that shows that a branch point also can be generated from disclinations in a liquid crystal confined to different conical geometries with homeotropic anchoring conditions. The cone aperture increases the bending stiffness but decreases the curvature of the disclination. These competing effects lead to a decrease in the total disclination curvature, increase in elastic energy and volume of the branching region. The results are summarized into power laws and integrated into a shape/energy diagram that reveals the effects of confinement and its gradient (cone angle) on disclination shape selection. These new findings are useful to assess the Frank elasticity of new nematic liquid crystals and to predict novel defect structures in complex confinement, including biological microfluidics and mesophase fiber spinning.

No abstract

Energy dissipation is a common mechanism to improve the ductility of polymeric hydrogels. However, for poly­(ethylene glycol) (PEG) hydrogels, it is not easy to dissipate energy, as polymer chains are dispersed in water without strong interchain interactions or decent entanglement. The brittleness limits the real applications of PEG hydrogels, although they are promising candidates in biomedical fields, as PEG has been approved by the U.S. Food and Drug Administration. Herein, we chemically introduced a center for energy dissipation in the PEG hydrogel system. Amphiphilic segmented PEG derivatives were designed through the melt polycondensation of triethylene glycol (PEG150) and high molecular weight PEG in the presence of succinic acid and mercaptosuccinic acid as dicarboxylic acids. Full PEG hydrogels with elastic nanospheres as giant cross-linkers were facilely prepared by the self-assembly of esterified PEG150 segments and the oxidation of mercapto groups. The resultant full PEG hydrogels can dissipate energy by the deformation of elastic nanospheres with outstanding ductility and self-recoverability while maintaining the excellent biocompatibility owing to their full PEG components. This work provides an original strategy to fabricate full PEG hydrogels with high ductility and self-recoverability, potentially applicable in biomedical fields.