No abstract

The effect of the time taken to add the alloy and the gas injection mode are significant factors for fast decarburisation. Industrial experiments and thermodynamic calculations are adopted to show the transition of the main factors and reaction sites with time. The results indicate that adding steel scrap and alloy are not recommended in the first 7 min in order to keep good thermodynamic and dynamic conditions. The gas injection mode is more critical for reducing the chamber pressure to 67 Pa in 8.5 min and the gas volume should be less than 10 m 3 in the first 4 min after the reaction begins. This method is effective in improving the decarburisation rate and decreasing the carbon content at the end of decarburisation. For 69% of the site tests the final carbon content was kept to about 10 ppm within 15 min.