No abstract

No abstract

1-3 type piezocomposites are very attractive materials for transducers and biomedical application, due to its high electromechanical coupling effects. Reliability study on 1-3 piezocomposites subjected to cyclic loading condition in transducer application is one of the primary concern. Hence, this study focuses on 1-3 piezocomposites for various PZT5A1 fiber volume fraction subjected to electrical fatigue loading up-to 106 cycles and at various elevated temperature. Initially experiments are performed on 1-3 piezocomposites, in order to understand the degradation phenomena due to various range in amplitude of electric fields (unipolar & bipolar), frequency of applied electric field and for various ambient temperature. Performing experiments for high cycle fatigue and for different fiber volume fraction of PZT5A1 is a time consuming process. Hence, a simplified macroscopic uni-axial model based on physical mechanisms of domain switching and continuum damage mechanics has been developed to predict the non-linear fatigue behaviour of 1-3 piezocomposites for temperature dependent electrical fatigue loading conditions. In this model, damage effects namely domain pinning, frozen domains and micro cracks, are considered as a damage variable (ω). Remnant variables and material properties are considered as a function of internal damage variable and the growth of the damage is derived empirically based on the experimental observation to predict the macroscopic changes in the properties. The measured material properties and dielectric hysteresis (electric displacement vs. electric field) as well as butterfly curves (longitudinal strain vs. electric field) are compared with the simulated results. It is observed that variation in amplitude of bipolar electric field and temperature has a strong influence on the response of 1-3 piezocomposites.

The Al2O3-SiC reinforced Al7075 Metal Matrix Composite (MMCs) is fabricated through liquid metallurgical technique. Ceramic particulates were amalgamated into aluminium alloy to achieve improved mechanical properties and wear resistance. Al-7075/Al2O3/SiC hybrid MMCs were produced by reinforcing 2%, 3%, 4% and 5% of Al2O3 and 3%, 5% and 7% of SiC particles. Microstructural analysis was carried out to evaluate the uniform dispersal of reinforcing particulates within the base matrix. The output results indicate that the mechanical properties of the hybrid MMCs enhanced by increase the wt. % of ceramic particulates. Tensile fractography results show the internal fracture structure of the tensile test specimens in which the particulates fracture and pullouts were observed. The wear characteristics of developed composites are studied using pin on disc apparatus. The high wear resistance is observed at 5% Al2O3 + 7% SiC reinforced MMCs.

No abstract