No abstract

Access and use of this website and the material on it are subject to the Terms and Conditions set forth at Mullite and mullite/ZrO₂-7wt%Y₂O₃ powders for thermal spraying of environmental barrier coatings Garcia, E.; Mesquita-Guimaraes, J.; Miranzo, P.; Osendi, M. I.; Wang, Y.; Lima, R. S.; Moreau, C.http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=fr L'accès à ce site Web et l'utilisation de son contenu sont assujettis aux conditions présentées dans le site LISEZ CES CONDITIONS ATTENTIVEMENT AVANT D'UTILISER CE SITE WEB. NRC Publications Record / Notice d'Archives des publications de CNRC:http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?action=rtdoc&an=18398983&lang=en http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?action=rtdoc&an=18398983&lang=fr READ THESE TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS WEBSITE.http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=en Vous avez des questions? Nous pouvons vous aider. Pour communiquer directement avec un auteur, consultez la première page de la revue dans laquelle son article a été publié afin de trouver ses coordonnées. Si vous n'arrivez pas à les repérer, communiquez avec nous à PublicationsArchive-ArchivesPublications@nrc-cnrc.gc.ca. Questions? Contact the NRC Publications Archive team atPublicationsArchive-ArchivesPublications@nrc-cnrc.gc.ca. If you wish to email the authors directly, please see the first page of the publication for their contact information. NRC Publications Archive Archives des publications du CNRCThis publication could be one of several versions: author's original, accepted manuscript or the publisher's version. / La version de cette publication peut être l'une des suivantes : la version prépublication de l'auteur, la version acceptée du manuscrit ou la version de l'éditeur. For the publisher's version, please access the DOI link below./ Pour consulter la version de l'éditeur, utilisez le lien DOI ci-dessous.http://doi.org/10.1007/s11666-009-9420-4Journal of Thermal Spray Technology, 19, 1-2, pp. 286-293, 2010-01-01 Mullite and Mullite/ZrO 2 -7wt. Mullite and mullite/ZrO 2 -7wt.%Y 2 O 3 coatings could be thought among the main protective layers for environment barrier coatings (EBCs) to protect Si-based substrates in future gas turbine engines. Considering that feedstock of the compound powder is not commercially available, two powder processing routes Spray Drying (SD) and Flame Spheroidization (FS) were implemented for both types of powders. For each method the particle size, the morphology, and microstructure of the powder particles was determined. In addition, the effect of the heat treatment on the powder crystallinity and microstructure of FS powders was also investigated. To evaluate their suitability as feedstock materials, the powders were plasma sprayed and their in-flight particle characteristics monitored for coatings production. The powder morphology was correlated to the in-flight particle characteristics and splat morphology to gain insight about into the influence of powder characteri...

Yttria-stabilized zirconia (YSZ)-mullite multilayer architectures with compositional grading between the bond coat and YSZ top coat are envisioned as solutions to ease their coefficient of thermal expansion mismatch induced stress. In this work, two different types of mullite powder (spray-dried and freezegranulated) and a mullite-YSZ 75/25 vol.% mixture spray-dried powder were employed. Using instrumented indentation with loads between 10 and 500 mN, the role of the powder characteristics on the mechanical behavior of air plasma-sprayed mullite bond coats deposited on SiC substrates was investigated. Hardness (H) and elastic modulus (E) were measured for the as-sprayed coatings and for coatings heat-treated at 1300°C, in water vapor environment, for periods up to 500 h. Both H and E values of the coatings are found to be highly dependent on the size distribution of the starting powders. It is aimed the fabrication of an efficient and cost-effective EBC prototype based on YSZ compositionally graded mullite.

Mullite-based systems have been considered as environmental barrier coatings (EBCs) for high temperature protection of Si-based ceramic (Si 3 N 4 , SiC) substrates against water vapor corrosion, for application in forthcoming turbine engines. Graded mullite/Y-ZrO 2 composites plasma sprayed over Hexoloy SiC substrates were analyzed as EBCs. All feedstock materials were purposely prepared and singular spraying conditions were used to assure superior crystallization. The different coated specimens were subjected to temperatures of 1300°C for 100-500 h under water vapor environment. The effect of water corrosion on the exposed coatings was investigated by focusing on their phase and microstructure changes.