Nb-doped TiO 2 (TNO) films, which are highly conductive and transparent, can be used as transparent conductive oxide (TCO) films. A predominant manufacturing method for TCO film is magnetron sputtering, and the material of the sputtering target affects the performance of the film. The objective of this study was to investigate the sintering densification, microstructure, and electrical properties of TNO and TiO 2 sputtering targets. The results showed that the segregation of Nb at the grain boundary in TNO helps to facilitate densification and inhibit grain growth. After 1200°C sintering, the sintered density of TNO target achieves almost 100% of the theoretical density. Moreover, the Nb 2 O 5 additive greatly improves the electrical properties, decreasing the resistivity of TiO 2 from >10 8 Ωcm to 4.6 3 10 1 Ωcm. Correlations between TNO sputtering target investigated in this study and TNO sputtered film reported in the literature are also preliminarily established. The resistivity of TNO film with an anatase structure is obviously lower than that of TNO target with a rutile structure. M.P. Paranthaman-contributing editor Manuscript No. 35178.

No abstract