Information metasurfaces have attracted much attention in recent years due to the capability to link the physical world and information science. However, most of the current information metasurfaces are either phase-only coding or amplitude-only coding, limiting their functions and applications. Here, a broadband and programmable amplitude-phase-jointcoding (APJC) information metasurface is proposed and experimentally demonstrated, from which the phase and amplitude of reflected electromagnetic waves can be independently controlled by adjusting the bias voltage of PIN diode integrated in the metaatom. In particular, the reflection amplitude can be continuously controlled from 0.1 to 0.9, and the reflection phase can be switched between two states with about 180°phase difference. Thus, the proposed metasurface is capable of realizing independent 1-bit or multibit amplitude coding and 1-bit phase coding, and both of them can be reprogrammed in real time in broad band from 8 to 13 GHz. The abilities of the programmable APJC information metasurface in manipulating the electromagnetic waves are demonstrated by both numerical simulations and experiments, including to suppress the sidelobes of scattering beam, generate the diffractive waves with arbitrary magnitudes, and so on. These results show unique advantages of APJC information metasurface in real-time independent controls of energy allocation and wavefront tailoring of the electromagnetic waves in a wide frequency band.

Polarization plays an important role in practical applications, and hence it is an essential task to generate the desired polarization of a spatial propagating wave (SPW). Here, the authors propose a method to design radiation metasurface, or metasurface emitter, which can produce arbitrarily polarized SPW. Different from the conventional transmission and reflection metasurfaces that can only manipulate the incoming spatial wave, the proposed radiation metasurface can be regarded as an electromagnetic (EM) wave emitter that can generate SPW by itself. More importantly, the polarization of the generated SPW can be flexibly customized by designing the phase distribution on metasurface. The metasurface is fed by a monopole antenna, and the energy is first coupled into the metasurface to form a surface wave. Modulated by the metasurface, the surface wave is then converted into SPW. As a proof of concept, they design and fabricate the radiation metasurfaces that are capable of generating radially, azimuthally, linearly, and circularly polarized SPWs, as well as dual‐beam radiations with different polarizations, respectively. The measured results have a good match to the theoretical predictions and full‐wave simulations. The proposed method provides an efficient way to generate SPWs with any desired polarizations for easy integration.