It is a challenge to manufacture pressure‐sensing materials that possess flexibility, high sensitivity, large‐area compliance, and capability to detect both tiny and large motions for the development of artificial intelligence products. Herein, a very simple and low‐cost approach is proposed to fabricate versatile pressure sensors based on microcrack‐designed carbon black (CB)@polyurethane (PU) sponges via natural polymer‐mediated water‐based layer‐by‐layer assembly. These sensors are capable of satisfying the requirements of ultrasmall as well as large motion monitoring. The versatility of these sensors benefits from two aspects: microcrack junction sensing mechanism for tiny motion detecting (91 Pa pressure, 0.2% strain) inspired by the spider sensory system and compressive contact of CB@PU conductive backbones for large motion monitoring (16.4 kPa pressure, 60% strain). Furthermore, these sensors exhibit excellent flexibility, fast response times (<20 ms), as well as good reproducibility over 50 000 cycles. This study also demonstrates the versatility of these sensors for various applications, ranging from speech recognition, health monitoring, bodily motion detection to artificial electronic skin. The desirable comprehensive performance of our sensors, which is comparable to the recently reported pressure‐sensing devices, together with their significant advantages of low‐cost, easy fabrication, especially versatility, makes them attractive in the future of artificial intelligence.

Strain sensors play an important role in the next generation of artificially intelligent products. However, it is difficult to achieve a good balance between the desirable performance and the easy-to-produce requirement of strain sensors. In this work, we proposed a simple, cost-efficient, and large-area compliant strategy for fabricating highly sensitive strain sensor by coating a polyurethane (PU) yarn with an ultrathin, elastic, and robust conductive polymer composite (CPC) layer consisting of carbon black and natural rubber. This CPC@PU yarn strain sensor exhibited high sensitivity with a gauge factor of 39 and detection limit of 0.1% strain. The elasticity and robustness of the CPC layer endowed the sensor with good reproducibility over 10,000 cycles and excellent wash- and corrosion-resistance. We confirmed the applicability of our strain sensor in monitoring tiny human motions. The results indicated that tiny normal physiological activities (including pronunciation, pulse, expression, swallowing, coughing, etc.) could be monitored using this CPC@PU sensor in real time. In particular, the pronunciation could be well parsed from the recorded delicate speech patterns, and the emotions of laughing and crying could be detected and distinguished using this sensor. Moreover, this CPC@PU strain-sensitive yarn could be woven into textiles to produce functional electronic fabrics. The high sensitivity and washing durability of this CPC@PU yarn strain sensor, together with its low-cost, simplicity, and environmental friendliness in fabrication, open up new opportunities for cost-efficient fabrication of high performance strain sensing devices.

Cellulose aerogels with low density, high mechanical strength, and low thermal conductivity are promising candidates for environmentally friendly heat insulating materials. The application of cellulose aerogels as heat insulators in building and domestic appliances, however, is hampered by their highly flammable characteristics. In this work, flame retardant cellulose aerogels were fabricated from waste cotton fabrics by in situ synthesis of magnesium hydroxide nanoparticles (MH NPs) in cellulose gel nanostructures, followed by freeze-drying. Our results demonstrated that the threedimensionally nanoporous cellulose gel prepared from the NaOH/urea solution could serve as scaffold/template for the nonagglomerated growth of MH NPs. The prepared hybridized cellulose aerogels showed excellent flame retardancy, which could extinguish within 40 s. Meanwhile, the thermal conductivity of the composite aerogel increased moderately from 0.056 to 0.081 W m −1 k −1 as the specific surface area decreased slightly from 38.8 to 37.6 cm 2 g −1 , which indicated that the excellent heat insulating performance of cellulose aerogel was maintained. Because the concepts of the process are simple and biomass wastes are sustainable and readily available at low cost, the present approach is suitable for industrial scale production and has great potential in the future of green building materials.

A 3D graphene nanoplatelets/reduced graphene oxide foam/epoxy nanocomposite exhibits superior electromagnetic interference shielding and excellent thermal conductivity.

CsPbX (X = Cl, Br, I) perovskite quantum dots (QDs) have emerged as competitive candidate luminescent materials in the photoelectric fields due to their superior luminescence properties. However, the major drawback such as poor resistance to temperature, moisture, and irradiation of light, especially for the red QDs with I, hinders their practical applications. Herein, we synthesized Mn-doped CsPbCl embedded in the cage of zeolite-Y as a new orange-red phosphor for the white light-emitting diode (WLED). The composites have significantly improved resistance to both elevated temperature and water over the bare Mn-doped QDs. The former exhibits little degradation whereas the latter shows apparent decline upon the irradiation of lights in the orange LED devices, which are fabricated by employing each material as a color-conversion phosphor coated on a 365 nm UV chip. A WLED is also achieved with a 365 nm UV chip coated with a CsPb(Cl,Br)-Y blue phosphor and a CsPbMnCl-Y orange phosphor. The device possesses a Commission Internationale de l'Éclairage coordinate of (0.34, 0.36), a correlated color temperature of 5336 K and a color rendering index of 81.