No abstract

A precise estimation of sediment transport capacity (Tc) is key to establishing process‐based erosion models. However, few data are available for estimating transport capacity on steep slopes and test materials sorted at high coarse grain values of >2 mm. Colluvial deposits with loose, coarse material and steep slopes make up the packed materials underlying the collapsing walls in benggang, which collapse due to hydraulic pressure and gravity. The objectives of this study were to investigate how flow discharge and slope steepness affect Tc and to examine relationships between Tc and flow velocity, shear stress, stream power, and unit stream power for colluvial deposits found on steep slopes. A nonerodible rill flume of 4 m long and 0.12 m wide was used. Slope steepness values ranged from 18% to 84%, and unit flow discharge values ranged from 0.56 × 10−3 to 4.44 × 10−3 m2 s−1. Tc increased as a power function with flow discharge and slope steepness with a Nash–Sutcliffe model efficiency (NSE) value of 0.99, and the effects of flow discharge were stronger than those of slope steepness. Tc was overestimated for a colluvial deposit when the equations of the ANSWERS, Zhang et al. and Wu et al. models were considered and when Tc exceeded 5 kg m−1 s−1, as the slope steepness used in our study was much higher than those used (<47%) in the other models. Regression analyses show that Tc can be predicted from linear equations of flow velocity, stream power, and unit stream power, and Tc can be fit to shear stress with power function equation. Flow velocity optimizes to predict Tc with NSE = 0.97, and stream power and shear stress can also be successfully related to Tc (NSE = 0.91 and NSE = 0.81, respectively); however, unit stream power performs poorly (NSE = 0.67). These results provide a basis for establishing process‐based erosion models on steep colluvial slopes.

Rainfall intensity and slope gradient are important factors that affect soil erosion; however, contradictory observations have been made due to different experimental conditions and materials. Colluvial deposits with loose, coarse material and steep slopes are easily erodible, but the erosion mechanism of colluvial deposition remains obscure. This work investigated the effects of heavy and storm rainfall intensity and steep slope gradients on the infiltration, runoff, and soil loss of colluvial soil. The rainfall intensity ranged from 1.00 to 2.33 mm min−1, and the slope gradient ranged from 36 to 84%. The infiltration rates declined sharply in the initial stage, whereas an opposite trend was observed for runoff rates until a steady state was reached after 5 min. Single‐ and multiple‐peak models illustrated the two types of changes for the sediment yield process. The infiltration volume and the coefficient increased with increasing rainfall intensity and decreased with increasing slope, whereas the runoff coefficient decreased with increasing rainfall intensity and increased with increasing slope. Runoff volume and sediment yield increased with increasing rainfall intensity but had a critical slope gradient of 58% and >47%. The sediment concentration increased with increasing rainfall intensity, and first increased and then decreased with increasing slope gradients at rainfall intensities of 1.00 and 1.33 mm min−1 but increased at rainfall intensities of 1.67, 2.00, and 2.33 mm min−1. The findings of this study can be used to clarify the erosion mechanisms in disturbed soils with high coarse particle content.

No abstract

No abstract