No abstract

A comb fiber filter based on modal interference is proposed and demonstrated in this paper. Here two cascaded up-tapers are used to excite the cladding mode, and a core-offset jointing point is used to act as an interference component. Experimental results show that this kind of structure possesses a comb filter property in a range of the C-band. The measured extinction ratio is better than 12 dB with an insertion loss of about 11 dB. A switchable multi-wavelength erbium-doped fiber laser based on this novel comb filter is demonstrated. By adjusting the polarization controller, the output laser can be switched among single-, dual-, and three-wavelengths with a side mode suppression ratio of better than 45 dB.

A widely tunable dual-wavelength erbium-doped fiber laser based on a cascaded Sagnac loop interferometer incorporating a multimode interference filter is proposed and experimentally demonstrated in this paper. The mode selection is implemented by using the cascaded Sagnac loop interferometer with two segments of polarization maintaining fibers, and the wavelength tuning was achieved by using the refractive index characteristic of multimode interference effects. The tunable dual-wavelength fiber laser has a wavelength tuning of about 40 nm with a signal-to-noise ratio of more than 50 dB.

No abstract

A fiber-optic strain and curvature sensor based on no-core fiber has been proposed and demonstrated. The sensor is fabricated using a multimode fiber without cladding, known as the no-core fiber with a thinner diameter. The jointing point between the no-core fiber and single-mode fiber is a taper, which will improve the sensitivity of the sensor. The peak wavelength shift of the sensor exhibits an excellent response for strain and curvature changes.Index Terms-Multimode interference, fiber optical sensor, strain, curvature.