No abstract

DRD technology is a new method to calculate the node water demand based on the monitoring node pressure of the water supply network. This method is able to acquire the water consumption in every node of the monitoring area. Therefore, no flow meter is needed to install on the main pipes. This paper describes the technical details of DRD application and the design of monitoring platform based on wireless sensor network (WSN). A case study is carried out in an actual water supply network and the result shows this method is accurate enough to provide decision support for water supply network management.

This paper studies the effects of different combinations of scanning strategies between layers on the surface quality, tensile properties, and microstructure of samples in a laser beam powder bed fusion (L-PBF) formation experiment of Ti-6Al-4V titanium alloy. The purpose of this experiment was to improve the comprehensive performance of the piece by selecting the optimal combination of scanning strategies. The results show that the surface roughness of the L-PBF specimen was the lowest under the combination of the CHESS scanning strategy, reaching 14 μm. The surface hardness of the samples was generally higher with the LINE scanning strategy and the angle offset of 90°, reaching 409 HV. The overall density of the samples was higher under the combination of CHESS scanning strategies, reaching 99.88%. Among them, the CHESS&45° sample had the best comprehensive properties, with a density of 99.85%, a tensile strength of up to 1125 MPa, a yield strength of 912 MPa, and an elongation of 8.2%. The fractured form was a ductile fracture, with many dimple structures. Compared with the CHESS scanning strategy, the tensile properties of the CHESS&45° samples were improved by 12.8%. The microstructure of the L-PBF sample was mainly composed of the primary β phase and α’ martensite phase. The upper surface of the CHESS scanning strategy combination sample had a clear melt channel, and the distribution of each phase was uniform. A certain number of columnar β crystals were distributed in the longitudinal section of the sample, which was paralleled to the build direction. The columnar β crystals of CHESS&45° were relatively coarse, which enhanced the tensile properties of the sample.