The bandgaps of monolayer and bulk molybdenum sulfide (MoS2 ) result in that they are far from suitable for application as a saturable absorption device. In this paper, the operation of a broadband MoS2 saturable absorber is demonstrated by the introduction of suitable defects. It is believed that the results provide some inspiration in the investigation of two-dimensional optoelectronic materials.

Photodetectors with excellent detecting properties over a broad spectral range have advantages for the application in many optoelectronic devices. Introducing imperfections to the atomic lattices in semiconductors is a significant way for tuning the bandgap and achieving broadband response, but the imperfection may renovate their intrinsic properties far from the desire. Here, by controlling the deviation from the perfection of the atomic lattice, ultrabroadband multilayer MoS photodetectors are originally designed and realized with the detection range over 2000 nm from 445 nm (blue) to 2717 nm (mid-infrared). Associated with the narrow but nonzero bandgap and large photoresponsivity, the optimized deviation from the perfection of MoS samples is theoretically found and experimentally achieved aiming at the ultrabroadband photoresponse. By the photodetection characterization, the responsivity and detectivity of the present photodetectors are investigated in the wavelength range from 445 to 2717 nm with the maximum values of 50.7 mA W and 1.55 × 10 Jones, respectively, which represent the most broadband MoS photodetectors. Based on the easy manipulation, low cost, large scale, and broadband photoresponse, this present detector has significant potential for the applications in optoelectronics and electronics in the future.

No abstract

An endstation with two high-efficiency soft x-ray spectrographs was developed at Beamline 8.0.1 of the Advanced Light Source, Lawrence Berkeley National Laboratory. The endstation is capable of performing soft x-ray absorption spectroscopy, emission spectroscopy, and, in particular, resonant inelastic soft x-ray scattering (RIXS). Two slit-less variable line-spacing grating spectrographs are installed at different detection geometries. The endstation covers the photon energy range from 80 to 1500 eV. For studying transition-metal oxides, the large detection energy window allows a simultaneous collection of x-ray emission spectra with energies ranging from the O K-edge to the Ni L-edge without moving any mechanical components. The record-high efficiency enables the recording of comprehensive two-dimensional RIXS maps with good statistics within a short acquisition time. By virtue of the large energy window and high throughput of the spectrographs, partial fluorescence yield and inverse partial fluorescence yield signals could be obtained for all transition metal L-edges including Mn. Moreover, the different geometries of these two spectrographs (parallel and perpendicular to the horizontal polarization of the beamline) provide contrasts in RIXS features with two different momentum transfers.

Photodetectors that capture light and convert it into electricity have been used in many applications, such as imaging systems, environmental surveillance, communications, and biological sensing. [1][2][3] UV detectors play an important role in practical applications, many devices have been prepared with wide bandgap semiconductors, such as ZnO, NiO, and TiO 2 etc. [4][5][6][7][8][9] However, these heterojunction self-powered detectors often exhibit low responsivity and slow response times.