Inspired by the physiological structure of the hand capable of realizing the continuous change in finger stiffness when grasping objects of different masses, a self-locking soft continuum robot with a large variable-stiffness range based on particle jamming and fibre jamming is proposed in this paper to meet the requirements of it in practical application. In this paper, a variable stiffness range is derived due to the good fluidity and rigidity of the spherical particles and the low elasticity and high toughness of the fibres. Then, an analysis model is established to deduce its self-locking condition, and the deflection angle of self-locking under the influence of external force is about 0.17 rad. The maximum stiffness of the experimental prototype can reach 1223.58 N m −1 due to the limitation of the experimental materials, despite the fact that the theoretical stiffness can be increased infinitely after self-locking. To explain the adaptability of the robot, the adaptive conditions of the soft continuum robot with variable stiffness are deduced. A new evaluation index, the adaptive intensity of the soft continuum robot, is introduced and the adaptability experiments are carried out. In adaptability experiments, the maximum bending angle of the continuum robot reaches 108°. Finally, the adaptability of the soft continuum robot to different geometries is discussed.

Nowadays improving the accuracy and enlarging the measuring range of six-axis force sensors for wider applications in aircraft landing, rocket thrust, and spacecraft docking testing experiments has become an urgent objective. However, it is still difficult to achieve high accuracy and large measuring range with traditional parallel six-axis force sensors due to the influence of the gap and friction of the joints. Therefore, to overcome the mentioned limitations, this paper proposed a 6-Universal-Prismatic-Universal-Revolute (UPUR) joints parallel mechanism with flexible joints to develop a large measurement range six-axis force sensor. The structural characteristics of the sensor are analyzed in comparison with traditional parallel sensor based on the Stewart platform. The force transfer relation of the sensor is deduced, and the force Jacobian matrix is obtained using screw theory in two cases of the ideal state and the state of flexibility of each flexible joint is considered. The prototype and loading calibration system are designed and developed. The K value method and least squares method are used to process experimental data, and in errors of kind Ι and kind II linearity are obtained. The experimental results show that the calibration error of the K value method is more than 13.4%, and the calibration error of the least squares method is 2.67%. The experimental results prove the feasibility of the sensor and the correctness of the theoretical analysis which are expected to be adopted in practical applications.

No abstract

No abstract

In the development of the multi-dimensional force sensor, dimension coupling is the ubiquitous factor restricting the improvement of the measurement accuracy. To effectively reduce the influence of dimension coupling on the parallel multi-dimensional force sensor, a novel parallel three-dimensional force sensor is proposed using a mechanical decoupling principle, and the influence of the friction on dimension coupling is effectively reduced by making the friction rolling instead of sliding friction. In this paper, the mathematical model is established by combining with the structure model of the parallel three-dimensional force sensor, and the modeling and analysis of mechanical decoupling are carried out. The coupling degree (ε) of the designed sensor is defined and calculated, and the calculation results show that the mechanical decoupling parallel structure of the sensor possesses good decoupling performance. A prototype of the parallel three-dimensional force sensor was developed, and FEM analysis was carried out. The load calibration and data acquisition experiment system are built, and then calibration experiments were done. According to the calibration experiments, the measurement accuracy is less than 2.86% and the coupling accuracy is less than 3.02%. The experimental results show that the sensor system possesses high measuring accuracy, which provides a basis for the applied research of the parallel multi-dimensional force sensor.