No abstract

Carbon capture and storage (CCS) and carbon capture and utilization (CCU) are two kinds of strategies to reduce the CO2 concentration in the atmosphere, which is emitted from the burning of fossil fuels and leads to the greenhouse effect. With the unique properties of ionic liquids (ILs), such as low vapor pressures, tunable structures, high solubilities, and high thermal and chemical stabilities, they could be used as solvents and catalysts for CO2 capture and conversion into value-added chemicals. In this critical review, we mainly focus our attention on the tuning IL-based catalysts for CO2 conversion into quinazoline-2,4(1H,3H)-diones from o-aminobenzonitriles during this decade (2012~2022). Due to the importance of basicity and nucleophilicity of catalysts, kinds of ILs with basic anions such as [OH], carboxylates, aprotic heterocyclic anions, etc., for conversion CO2 and o-aminobenzonitriles into quinazoline-2,4(1H,3H)-diones via different catalytic mechanisms, including amino preferential activation, CO2 preferential activation, and simultaneous amino and CO2 activation, are investigated systematically. Finally, future directions and prospects for CO2 conversion by IL-based catalysts are outlined. This review is benefit for academic researchers to obtain an overall understanding of the synthesis of quinazoline-2,4(1H,3H)-diones from CO2 and o-aminobenzonitriles by IL-based catalysts. This work will also open a door to develop novel IL-based catalysts for the conversion of other acid gases such as SO2 and H2S.

Supported ozone catalysts usually take alumina, activated carbon, mesoporous molecular sieve, graphene, etc. as the carrier for loading metal oxide via the impregnation method, sol–gel method and precipitation method. In this work, a Mn-modified fly ash catalyst was synthesized to reduce the consumption and high unit price of traditional catalyst carriers like alumina. As a solid waste discharged from coal-fired power plants fueled by coal, fly ash also has porous spherical fine particles with constant surface area and activity, abd is expected to be applied as the main component in the synthesis of ozone catalyst. After the pretreatment process and modification with MnOx, the obtained Mn-modified fly ash exhibited stronger specific surface area and porosity combined with considerable ozone catalytic performance. We used sodium acetate as the contaminant probe, which is difficult to directly decompose with ozone as the end product of ozone oxidation, to evaluate the performance of this Mn-modified fly. It was found that ozone molecules can be transformed to generate ·OH, ·O2− and 1O2 for the further oxidation of sodium acetate. The oxygen vacancy produced via Mn modification plays a crucial role in the adsorption and excitation of ozone. This work demonstrates that fly ash, as an industrial waste, can be synthesized as a potential industrial catalyst with stable physical and chemical properties, a simple preparation method and low costs.