No abstract

No abstract

Water quality index (WQI) is the primary method applied to characterize water quality in the world. The current study employed the statistical analysis and multilayer perceptron (MLP) approaches for predicting groundwater quality in the Ghiss-Nekkor aquifer, northeast of Al Hoceima, Morocco. Fifty sampled groundwater were identified and analyzed for major anions and cations throughout May 2019. Several physicochemical parameters of all the samples were identified in this investigation, such as TDS, pH, EC, Na, K, Ca, Mg, HCO3, NO3, Br, SO4, and Cl. The entropy-weighted groundwater quality index (EWQI) was calculated from these parameters. The WQI procedure determined the suitability of groundwater for consumption. The WQI value varied from 90.98 to 337.28. The EC, TDS, WQI, and Cl- spatial distribution showed that EC and Cl- are associated with poor groundwater quality. A single sample (W16) represented unsuitable water for drinking purposes and offered a WQI value of 337.28, indicating poor drinking quality due to seawater intrusion, overexploitation, and harsh weather conditions. The majority of the values obtained for the parameters exceeded the recommended limit of the World Health Organization (WHO)’s guidelines for consumption. The findings show that using parameters is a straightforward method for predicting water quality indexes with sufficient and suitable precision. The MLP model shows good predictive performances in terms of the coefficient of determination R2, mean absolute error (MAE), and root-mean-square error (RMSE) with values of 0.9885, 5.8031, and 4.7211, respectively. The ANN approach was applied to develop a model that can accurately predict WQI utilizing mineralization, TH, NO3, and NO2 as inputs. The MAE for the model’s performance was calculated to be 4.72. A Bland–Altman test was used to validate that the model is suitable. Following the test, it was determined that the model is appropriate for predicting WQI, with an error of just 0.1%.

Soil erosion is an increasingly issue worldwide, due to several factors including climate variations and humans’ activities, especially in Mediterranean ecosystems. Therefore, the aim of this paper is: (i) to quantify and to predict soil erosion rate for the baseline period (2000–2013) and a future period (2014–2027), using the Revised Universal Soil Loss Equation (RUSLE) and the Soil and Water Assessment Tool (SWAT) model in the R’Dom watershed in Morocco, based on the opportunities of Remote Sensing (RS) techniques and Geographical Information System (GIS) geospatial tools. (ii) we based on classical statistical downscaling model (SDSM) for rainfall prediction. Due to the lack of field data, the model results are validated by expert knowledge. As a result of this study, it is found that both agricultural lands and bare lands are most affected by soil erosion. Moreover, it is showed that soil erosion in the watershed was dominated by very low and low erosion. Although the area of very low erosion and low erosion continued to decrease. Hence, we hereby envisage that our contribution will provide a more complete understanding of the soil degradation in this study area and the results of this research could be a crucial reference in soil erosion studies and also may serve as a valuable guidance for watershed management strategies.

This article is devoted to the analysis of the confinement effects of the neutral dynamics generated by a short-gap (0.5 mm) discharge inside three different microcavity geometries (cylinder, cube, and bricklike) filled with air at atmospheric pressure (760 Torr) and ambient temperature (293 K). The discharge is modelled by two mathematical functions representing the Joule heating and the momentum transfer between charged and neutral particles. Their spatio-temporal evolution are taken from experimental results with 470 ns for the duration and 13.5 W for the maximum injected power. The neutral gas evolution is described by the classical transport equations and solved by a powerful numerical monotonic upstream-centered scheme for conversion laws. Because of the microcavity dimensions considered, particular care has been used in the analysis of the thermal and hydrodynamics boundary layers which condition the gas–solid interaction in terms of viscous slip effects and thermal exchanges. The results presented show the microcavity geometry effects on the distribution of the initial cylindrical pressure wave as soon as it reaches the lateral walls. They show the specificity of the cube and bricklike microcavities due to the delayed reflections on the corners leading to a more heterogeneous gas behavior than in the case of the cylindrical microcavity. We also discuss the specific gas behaviors near the wall resulting from heat exchange and viscous stress.