We propose a color digital holography by using spectral estimation technique to improve the color reproduction of objects. In conventional color digital holography, there is insufficient spectral information in holograms, and the color of the reconstructed images depend on only reflectances at three discrete wavelengths used in the recording of holograms. Therefore the color-composite image of the three reconstructed images is not accurate in color reproduction. However, in our proposed method, the spectral estimation technique was applied, which has been reported in multispectral imaging. According to the spectral estimation technique, the continuous spectrum of object can be estimated and the color reproduction is improved. The effectiveness of the proposed method was confirmed by a numerical simulation and an experiment, and, in the results, the average color differences are decreased from 35.81 to 7.88 and from 43.60 to 25.28, respectively.

No abstract

No abstract

We propose a single-shot digital holography for recording multiwavelength and complex amplitude information by using a single monochromatic image sensor. The zeroth-order wave and conjugate image in each wavelength are removed from a recorded single hologram by applying parallel phase-shifting interferometry. Angular multiplexing is utilized to record the complex amplitude of an object wave in each wavelength separately, and no color filter is required. The effectiveness of the proposed technique was experimentally verified.

We propose a single-shot phase-unwrapping method using two wavelengths in parallel phase-shifting digital holography (PPSDH). The proposed method enables one to solve the phase ambiguity problem in PPSDH. We conducted an experiment of the proposed method using two lasers whose wavelengths are 473 and 532 nm. An object having about 1.9 μm step, which is 7.1 times larger than the half wavelength of one of the lasers (266 nm), was fabricated by using vapor deposition of aluminum. Single-shot measurement of the height of the object was successfully demonstrated, and the validity of the proposed method was verified.