Developing solution-processable red organic light-emitting diodes (OLEDs) with high color purity and efficiency based on multiple resonance thermally activated delayed fluorescence (MR-TADF) is a formidable challenge. Herein, by introducing auxiliary electron donor and acceptor moieties into the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) distributed positions of multiple resonance skeleton simultaneously, an effective strategy to obtain red MR-TADF emitters was represented. The proof-of-the-concept molecule BN-R exhibits a narrowband pure-red emission at 624 nm, with a high luminous efficiency of 94 % and a narrow bandwidth of 46 nm. Notably, the fabricated solutionprocessable pure-red OLED based on BN-R exhibits a state-of-the-art external quantum efficiency over 20 % with the Commission Internationale de I'Éclairage coordinates of (0.663, 0.337) and a long operational lifetime (LT 50 ) of 1088 hours at an initial luminance of 1000 cd m À 2 .

Multi-resonance thermally activated delayed fluorescence (MR-TADF) materials are considered a class of organic materials with exceptional electronic and optical properties, which make them promising for the applications in organic light-emitting diodes (OLEDs). In this study, we improved, synthesized, and characterized a multiple-resonance type emitter based on the assembly of MR-building blocks (MR-BBs). By optimizing the geometric arrangement of MR-BBs, we were able to generate narrowband emission in the longer wavelength region and shorten the delayed excitedstate lifetime, resulting in improved emission efficiency compared to the parent molecule. Our proof-of-concept molecule, m-DBCz, exhibited narrowband yellowish-green TADF emission with a full width at half-maximum of 32 nm and a small singlet-triplet energy gap of 0.04 eV. The OLED developed using m-DBCz as the emitter demonstrated electroluminescence at 548 nm and achieved a high external quantum efficiency (EQE) of 34.9 %. Further optimization of the device resulted in a high external quantum efficiency of 36.3 % and extremely low efficiency roll-off, with EQE values of 30.1 % and 27.7 % obtained even at high luminance levels of 50 000 and 100 000 cd m À 2 . These results demonstrate the full potential of MR-TADF materials for applications on ultrahigh-luminance OLEDs.

Developing solution-processable red organic light-emitting diodes (OLEDs) with high color purity and efficiency based on multiple resonance thermally activated delayed fluorescence (MR-TADF) is a formidable challenge. Herein, by introducing auxiliary electron donor and acceptor moieties into the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) distributed positions of multiple resonance skeleton simultaneously, an effective strategy to obtain red MR-TADF emitters was represented. The proof-of-the-concept molecule BN-R exhibits a narrowband pure-red emission at 624 nm, with a high luminous efficiency of 94 % and a narrow bandwidth of 46 nm. Notably, the fabricated solutionprocessable pure-red OLED based on BN-R exhibits a state-of-the-art external quantum efficiency over 20 % with the Commission Internationale de I'Éclairage coordinates of (0.663, 0.337) and a long operational lifetime (LT 50 ) of 1088 hours at an initial luminance of 1000 cd m À 2 .

Herein, two series of isomers are developed based on biphenyl (BP) and two typical donor groups diphenylamine (DPA) and 9,9-dimethyl-9,10-dihydroacridine (DMAc) to figure out the isomerization effect on structures and photophysical properties. The computational simulations and photophysical analyses indicate that the substitution positions influence not only the molecular conformations but also the frontier molecular orbital distributions, which further influence the photoluminescence properties. We find that twisted structure is beneficial for the separation of the frontier molecular orbitals, while more planar structure contributes to higher luminescent intensity for both fluorescence and phosphorescence. Meanwhile, room temperature phosphorescence (RTP) is caught when these isomers are doped in 4,4'-dibromo-1,1'-biphenyl (DBBP). The p-DDPA/DBBP complex shows the highest intensity of phosphorescence and the longest lifetime (81.71 ms). The photoluminescence quantum yield of the p-DDPA/DBBP complex is as high as 54 % with RTP quantum efficiency approximately 12 %, which is 28 % for pure p-DDPA without afterglow.

Multi-resonance thermally activated delayed fluorescence (MR-TADF) materials are considered a class of organic materials with exceptional electronic and optical properties, which make them promising for the applications in organic light-emitting diodes (OLEDs). In this study, we improved, synthesized, and characterized a multiple-resonance type emitter based on the assembly of MR-building blocks (MR-BBs). By optimizing the geometric arrangement of MR-BBs, we were able to generate narrowband emission in the longer wavelength region and shorten the delayed excitedstate lifetime, resulting in improved emission efficiency compared to the parent molecule. Our proof-of-concept molecule, m-DBCz, exhibited narrowband yellowish-green TADF emission with a full width at half-maximum of 32 nm and a small singlet-triplet energy gap of 0.04 eV. The OLED developed using m-DBCz as the emitter demonstrated electroluminescence at 548 nm and achieved a high external quantum efficiency (EQE) of 34.9 %. Further optimization of the device resulted in a high external quantum efficiency of 36.3 % and extremely low efficiency roll-off, with EQE values of 30.1 % and 27.7 % obtained even at high luminance levels of 50 000 and 100 000 cd m À 2 . These results demonstrate the full potential of MR-TADF materials for applications on ultrahigh-luminance OLEDs.