A new temperature fiber ring laser (FRL) sensor based on a cascaded Sagnac loops fiber structure is proposed and experimentally demonstrated. The optical FRL sensor consists of cascaded Sagnac loops by inserting two polarization-maintaining optical fibers (PMF) with slightly different lengths. PMF with length of 56 cm and 75 cm are used in Sagnac loops as a filter and sensing unit in laser cavity. The working principle of the sensor is based on the phase shift (θ) caused by birefringence between two principal polarization modes and enhance the sensitivity by constructing a Vernier-scale. In an appropriate temperature range (25℃-31℃), the detection sensitivity of FRL sensor based on a cascaded Sagnac structure is significantly higher than other FRL sensors. Thanks to the laser sensing system, the sensitivity can be modulated by changing the free spectral range (FSR). The experimental results show that the temperature sensitivity of the cascade Sagnac structure sensor is-4.031 nm / ° C, which is five times higher than that of FRL sensor base on the single Sagnac structure.

No abstract

We demonstrate a highly sensitive and practical fiber-based temperature sensor system. The sensor is constructed based on a fiber ring laser (FRL) as well as a side-polished fiber filled with isopropanol. The laser cavity of the sensing part fiber is polished by the wheel fiber polishing system with residual thickness (RT) is selected to detect the temperature in the FRL. Thanks to the high thermo-optic coefficient of isopropanol, the sensitivity of the proposed temperature sensor could be effectively improved by filling isopropanol in the cost-less side polished single mode fiber. Refractive index (RI) of isopropanol changes with the surrounding temperature variation allowing high-sensitivity temperature sensing. Experimental results demonstrate that the side polished fiber can efficiently excite high-order cladding modes which enhance the modular interference increase the interaction between the evanescent wave and the isopropanol. Besides, the results show that the sensitivity can be as high as 2 nm/°C in the temperature range of 25 °C–35°C.

No abstract

Optical fiber sensors are of splendid strength for electrical field intensity sensor due to characteristics including the immunity to electromagnetic interference, lightweight, high sensitivity, and large bandwidth. In this paper, we proposed an electric field intensity sensor based on Mach-Zehnder interferometer (MZI) based liquid crystal (LC) filled photonic crystal fiber (PCF) embedded in optical fiber ring laser (FRL). The air hole of PCF combines the LC and fiber core together. When LC is introduced into air holes, it can maintain the waveguide based on external parameters. The photonic bandgap effect significantly improved the sensitivity between light and external electrical field intensity. Thanks to the FRL demodulation, a high signal to noise ratio (SNR) spectrum about 35 dB is obtained. Besides, in comparison with traditional LC-PCF structures, the sensitivity of ours is as high as 1.1 nm/Vrms which is about twice than traditional sensors. At the same time, the stability of proposed sensor was verified which fluctuation was 0.15 nm around 2.5 hours. Therefore, our structure is expected to practical applications in remote electric field monitor and such electric modulate electro-optical devices.