We report on a systematic study of solvent and polymer matrix effects on the phase segregation behavior of 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-pentacene) blends incorporated into two different amorphous polymer matrices, poly (a-methyl styrene) and poly (triarylamine), and using two solvents, chlorobenzene and tetralin. Optical microscopy, X-ray diffraction analyses, and optical absorption measurements are used to evaluate the film morphology, crystallinity, and optical density, respectively. These analyses are correlated with the extent of vertical segregation of TIPS-pentacene, as observed for the blended films by depth-profile XPS analyses. The microstructure and vertical phase segregation of TIPS-pentacene in blend films are found to be strongly influenced by the choice of solvent. Tetralin, a solvent with a high boiling temperature, was found to be more desirable for achieving distinct phase segregation/crystallization of TIPS-pentacene in blend films and best performance in OFETs with a dual-gate geometry. The electrical properties of top and bottom channels were consistent with the morphological characterization and OFETs processed from tetralin showed higher mobility values than those from chlorobenzene. Further modification of the annealing conditions in the TIPS-pentacene/PTAA/tetralin ternary system led to top-gate OFETs with mobility values up to 2.82 cm 2 /Vs.

No abstract

As the needs for low-cost rapidly-produced microfluidics are growing with the trend of Lab-on-a-Chip and distributed healthcare, the fully inkjet-printing of microfluidics can be a solution to it with numerous potential electrical and sensing applications. Inkjet-printing is an additive manufacturing technique featuring no material waste and a low equipment cost. Moreover, similar to other additive manufacturing techniques, inkjet-printing is easy to learn and has a high fabrication speed, while it offers generally a great planar resolution down to below 20 µm and enables flexible designs due to its inherent thin film deposition capabilities. Due to the thin film feature, the printed objects also usually obtain a high vertical resolution (such as 4.6 µm). This paper introduces a low-cost rapid three-dimensional fabrication process of microfluidics, that relies entirely on an inkjet-printer based single platform and can be implemented directly on top of virtually any substrates.

No abstract

Growth of Si1−xSnx alloys on Ge1−ySny-buffered Si(100) was achieved via reactions of SnD4 and SiH3SiH2SiH3 at 275°C. Kinetic studies indicate that unprecedented low growth temperatures are made possible by the highly reactive SiH2 groups. The authors obtain supersaturated metastable compositions (y∼25%) near the indirect to direct band gap crossover predicted by first principles simulations. Extensive characterizations of composition, structure, and morphology show that the SiSn∕GeSn films grow lattice matched via a “compositional pinning” mechanism. The initial Raman observations of Si–Sn bond vibrations in a condensed phase are discussed in the context of simulated bond distributions in the alloys.