SUMMARYExperiments were conducted across 2 years to determine the effect of harvesting methods – combine harvester and hand harvesting – and harvest time during ripening on milling quality of long grain rice grown in the rainfed lowland ecosystem in Cambodia. Head rice yield (HRY) was highest when rice was harvested 25 days after flowering and decreased with delay in harvesting at 35 and 45 days after flowering. This was accompanied by a general decline in grain moisture content at harvest, although it was still high at 24–25% at 35 days after flowering. The decline in HRY was associated with increases in fissured grain percentage observed immediately after harvest. Hand harvesting produced 2–6% higher HRY than combine harvesting. Fissured grain in hand harvested crops was lower in year 1, but was similar to combine harvested crops in year 2. Both hand and combine harvested crops were sun-dried but rough rice harvested by combine was dried on plastic sheet and this may have contributed to reduction in HRY. Maximum HRY percentage was only about 44% and the factors contributing to this low HRY were discussed. Harvesting time and methods had no significant effect on grain yield, but the field grain loss during the harvesting operation was 2–5% higher in combine than hand harvesting.

Combine has been well adopted by smallholders in lowlands of Cambodia and is contributing to the development of mechanized rice production for commercial purposes. Broken rice is a major issue for the commercial rice product, and fissured grain at harvest leads to broken rice and lowers head rice yield (HRY) during milling. Factors that determine grain fissures and broken rice were obtained from three studies: an on-farm study of fissured grain, a research station experiment of fissured grain and broken rice harvested at different ripening stages and a mill study of fissured and broken rice during drying and milling processes in Cambodia. There was significant variation in fissured rice percentage among 20 farms sampled, and the fissured grain was negatively correlated with grain moisture content at harvest. Time of harvesting was crucial, as delay in harvesting after 25 days after flowering (DAF) often resulted in lower grain moisture content and higher fissured grain, which subsequently reduced HRY. However, the optimum time of harvesting varied across four seasons for crops harvested manually or by combine. In some years, crops harvested at 35 DAF had rather low per cent fissured grain with subsequently high HRY, this may have been associated with slightly lower temperatures. The mill study showed that fissured grain developed during the drying, storage and milling processes. It is concluded that while grain moisture content at the time of harvest may be used as an indication of subsequent HRY, the latter was more strongly related to fissured grain at harvest.