Seafloor polymetallic sulfide specimens were developed according to engineering rock test method standard (GB/T 50266-2013). Seafloor polymetallic sulfide wet density and dry density were tested. Uniaxial compressive strength and triaxial compression strength of seafloor polymetallic sulfide were tested using rock mechanics test system MTS 815. Elasticity modulus and Poisson's ratio of seafloor polymetallic sulfide were calculated based on specimens stress-strain curves. Cohesion and internal friction angle were calculated based on specimens triaxial test Mohr stress circle. Test results show that seafloor polymetallic sulfide dry density average value is 2.6 g/cm3, wet density average value is 2.94 g/cm3. Uniaxial compressive strength and triaxial compression strength of seafloor polymetallic sulfide are unstable. Average value of the uniaxial compressive strength is 10.243MPa. Average value of triaxial compression strength test peak load is 47.166KN. Cohesion is 2.447MPa and internal friction angle is 38.04o.