No abstract

Intermittent bus lanes (IBLs) can improve road capacity by allowing other regular vehicles to drive in the idle space of a dedicated bus lane. However, excessive vehicles in the IBL will cause additional bus delays. To avoid such problems, this study proposes a method to determine the capability of IBL permitted for regular vehicles first, and then use it as the total amount restriction of lane-borrowing vehicles to implement a bus lane control strategy that will improve road capacity and avoid additional bus delays. A model for calculating the capability of IBL is also provided. Vehicles between two buses are designated as potentially lane-borrowing vehicles that could follow the buses to leave the road section. The evolution process of these vehicles in the unit is analyzed using kinematic wave theory to obtain the formed traffic queue length. Using the rear bus trajectory to set the length limit on the traffic queue, the estimated total amount of lane-borrowing vehicles is corrected to establish the final capability of the IBL. The applicability of the method was evaluated from three perspectives: bus departure interval, road traffic saturation, and near-side bus stop. The simulation results showed that the proposed method can guarantee no additional bus delay compared to the situation of a dedicated bus lane. It can also improve road capacity more than traditional IBL under any degree of saturation and bus departure interval. Compared with traditional IBL, the average travel time of regular vehicles is shorter, except when the degree of saturation is high and the bus departure interval is large.